Home / Services / Deep Foundations / Pile QA/QC
Deep foundation quality assurance and quality control
Pile QA/QC Programs for Owners and Contractors
Pile monitoring tells you what happened on each pile. A QA/QC program makes sure the whole foundation was built to one standard: the right materials, the right criteria, every hold point witnessed, every deviation closed, and one record package at the end.
- Covers
- Driven, drilled, auger cast, helical and micropile foundations
- Built around
- Inspection and test plan, specification, statement of special inspections
- Deliverable
- ITP, hold point records, material verification, nonconformance log, final pile record package
- Works for
- Owner quality assurance or contractor quality control
- Standards
- IBC 1705.7 / 1705.8 / 1705.9 · Project specification · Inspection and test plan
- Dispatched from
- Sugar Land, TX headquarters · 27 regional hubs
- Often paired with
- Pile Installation Monitoring
Drilled Shaft & Auger Cast Pile Inspection
Static Pile Load Testing
All deep foundation services - Call us
- (346) 420-5425
Owner QA or contractor QC
On owner quality assurance we report to the owner or its engineer and verify that the contractor's work and records meet the specification. On contractor quality control we work for the foundation contractor or general contractor and produce the records the owner's QA reviews. The scope is set in writing at the start so no one is checking their own work.
What a pile QA/QC program covers
The program starts with an inspection and test plan that lists every activity, its acceptance criteria, the record that proves it, and whether it is a hold point, a witness point, or a review.
- Submittal review support: pile materials, hammer or rig, installation plan, concrete and grout mixes
- Material receiving: mill certifications, precast plant records, heat numbers, reinforcing steel
- Hold points for indicator piles, test piles, load tests, and integrity tests
- Splice and pile cap connection welding inspection by a certified welding inspector
- Concrete and grout testing in the field and the laboratory
- Nonconformance reports tracked to the engineer's disposition and close-out
- Survey of as-installed pile locations against the plan, with our surveying group where needed
The final pile record package
At the end of the foundation we assemble the as-installed record for every pile, all test reports, material certifications, and the closed nonconformance log in the order the engineer of record and building official ask for. It is the document the owner keeps for the life of the structure.
What you receive
Deliverables
- Inspection and test plan with hold and witness points
- Material verification records
- Pile-by-pile installation records
- Load and integrity test reports
- Nonconformance log with dispositions and close-outs
- Final pile record package
Who buys it
Built for
- Owners and owner's engineers who want independent foundation QA
- EPC and general contractors who need a documented QC program
- Industrial, energy, and LNG projects with large pile counts
- Public owners who require third-party foundation inspection
Related CMT services
FAQ
Pile QA/QC Programs: questions buyers ask
Can you run QA and QC on the same project?
Not for the same work. One party cannot independently verify records it produced. We can provide QC to the contractor or QA to the owner, and we say up front which role we hold.
Do you write the inspection and test plan?
Yes, from the specification, the statement of special inspections, and the geotechnical report, and we review it with the engineer of record before work starts.
Scheduling & proposals
Need pile qa/qc?
Call to schedule a technician, or send project documents for a written proposal.