Home / Services / Deep Foundations / Static load testing

Static pile load testing

Static Pile Load Testing: Compression, Tension and Lateral

A static load test puts real load on a real pile and measures how it moves. It is the reference test the other methods are calibrated against, and on many projects it is what proves the design capacity before production piles are installed.

Test types
Axial compression, axial tension, lateral, bi-directional static
We provide
Reaction system, test beam, jack, instrumentation, readings at each increment, test report
Turnkey
One firm sets up, runs, and reports the test
Interpretation
By the engineer of record or a licensed engineer engaged for the project
Standards
ASTM D1143/D1143M · ASTM D3689/D3689M · ASTM D3966/D3966M · ASTM D8169/D8169M
Dispatched from
Sugar Land, TX headquarters · 27 regional hubs
Often paired with
Dynamic Pile Testing (PDA)
Pile Installation Monitoring
Pile Integrity Testing (PIT, CSL, TIP)
All deep foundation services
Call us
(346) 420-5425

Static load test types

The test method follows the load the pile will carry in service.

  • Axial compression, ASTM D1143: the most common proof and design verification test
  • Axial tension, ASTM D3689: for uplift, towers, and tie-down piles
  • Lateral, ASTM D3966: for piles resisting wind, seismic, mooring, or equipment loads
  • Bi-directional static, ASTM D8169: an embedded jack loads the pile against itself, no surface reaction system needed

What we do on a load test

Before the test we confirm the loading procedure, increments, hold times, and maximum test load in the specification, then set up the reaction system, test beam, and calibrated jack sized for that load. We set up dial gauges or displacement transducers on an independent reference beam, and strain gauges or telltales where the test plan includes them.

During the test we apply and hold each load increment, record load and movement at every increment and hold, watch the reference system, and stop and notify the engineer if the pile or the reaction system behaves outside the plan. After the test we reduce the data, plot load against movement, and issue the report.

When to run a static test

Static tests are usually run on test piles during design or before production, to verify the capacity assumed in design and to calibrate dynamic testing or driving criteria. They take more time and money per pile than dynamic testing, which is why most projects run a few static tests and use other methods for the rest.

What you receive

Deliverables

  • Load test plan review, reaction system, and instrumentation layout
  • Raw readings at each load increment and hold
  • Load versus movement plot
  • Static load test report for the engineer of record

Who buys it

Built for

  • Geotechnical engineers verifying design capacity
  • Owners on projects that require a load test before production piles
  • Foundation contractors who need an independent test record
  • Transmission, tower, and solar projects with uplift and lateral loads

Related CMT services

Geotechnical engineering

FAQ

Static Pile Load Testing: questions buyers ask

How long does a static load test take?

Setup takes the longest. The test itself usually runs from several hours to about a day depending on the loading procedure the specification selects and whether creep or cyclic holds are required. The pile also needs time after installation, and concrete or grout piles need to reach strength before testing.

Who interprets the results?

The geotechnical engineer of record, or a licensed engineer engaged for the project, judges capacity against the design. We provide the test record and data reduction they need.

Scheduling & proposals

Need static load testing?

Call to schedule a technician, or send project documents for a written proposal.

Talk to us

Questions about a project? Send a note.

Nothing here is required — leave a phone number or an email and we'll get back to you. For a written scope, the proposal request form takes plans and specs.

Or call (346) 420-5425 · info@constructionmaterialtesting.com