Home / Services / Materials Testing / Orem, UT
Orem, Utah
Construction Materials Testing in Orem, UT
Concrete, soil, and aggregate testing in Orem, Utah — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Orem and the surrounding UT area — Salt Lake City, West Valley City, Provo
- Coverage
- Utah statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Orem
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Orem
Orem sits at the base of the Wasatch Range on a broad alluvial bench, where soils can shift from well-graded gravels to silty lake-bed deposits within a single project footprint — and where Utah's semi-arid climate means concrete can be in jeopardy from high evaporation rates in summer and freezing temperatures in winter. Infrastructure growth along the US-89 corridor and the expanding tech and mixed-use development around the University Avenue area means structural slabs, retaining systems, and utility corridors are going in year-round. Getting the materials right — compacted subgrade that meets density specifications, concrete that develops the design strength, aggregate that meets gradation requirements — is not optional on any of those projects. Dispatched through our Salt Lake City regional hub, our ACI- and NICET-certified field technicians bring ASTM-compliant field and laboratory testing to Orem job sites on a scheduled or project-coverage basis, backed by a laboratory operating under a documented quality system and reporting prepared for third-party review.
Utah's Wasatch Front soils commonly include lake sediments from ancient Lake Bonneville that can exhibit low bearing capacity and moisture sensitivity, making Proctor compaction baselines and in-place density verification especially consequential before placing structural fill or pavement sections. Concrete placements in Orem also require attention to hot, low-humidity summer afternoons — conditions that accelerate surface evaporation and can compromise finishing and curing if not monitored.
FAQ · Orem
Our Orem project has highly variable soils across the site — how do you determine how many Proctor tests we need?
The number of ASTM D698 or D1557 Proctor tests depends on how many distinct soil types or material sources are present. When visual classification or gradation data — run per ASTM D422 or D2487 — indicates a material change, a new moisture-density relationship curve is warranted. Your geotechnical engineer of record typically defines the trigger points; we work from those specifications and flag material changes observed in the field.
Utah County inspectors have asked for documentation of our fill compaction. What exactly does a nuclear density test report include?
Each ASTM D6938 nuclear gauge test report includes the test location referenced to a site plan or station, lift number, wet density, moisture content, dry density, the applicable Proctor reference, and the calculated percent compaction against that baseline. Reports are issued through our project portal and are formatted to satisfy Utah County and UDOT documentation requirements for structural fill verification.
Concrete pours in Orem during July and August concern me — what fresh concrete tests address hot-weather risks?
ACI 305 defines hot-weather concreting thresholds. During a field visit, technicians measure concrete temperature per ASTM C1064 alongside slump (ASTM C143), air content (ASTM C231), and unit weight (ASTM C138). If temperature or evaporation rate conditions approach ACI 305 limits, those readings are documented in the field report so the contractor and EOR can act on placement or curing measures before cylinders are cast.
How fast can a technician be on site in Orem?
Orem work is dispatched through our Salt Lake City, UT regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Orem, UT?
Field work in Orem is dispatched through the Salt Lake City, UT regional hub, about 33 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Orem projects.
Are the technicians you send to Orem certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Utah agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring: we staff this work locally. Field technician openings in Orem · all positions.
Scheduling & proposals
Need construction materials testing in Orem?
Call to schedule a technician, or send project documents for a written proposal.