Home / Services / Materials Testing / Provo, UT
Provo, Utah
Construction Materials Testing in Provo, UT
Concrete, soil, and aggregate testing in Provo, Utah — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Provo and the surrounding UT area — Salt Lake City, West Valley City, West Jordan
- Coverage
- Utah statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Provo
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Provo
Provo sits at the foot of the Wasatch Range on a broad alluvial bench, where decades of residential growth, university expansion, and tech-sector commercial development have pushed construction activity steadily outward into soils that range from dense gravelly alluvium near the valley floor to softer lacustrine deposits left by ancient Lake Bonneville. Concrete placed through Utah's wide seasonal temperature swings — hot, dry summers and cold winters with ground-freeze potential — demands documented temperature and slump controls from the first truck to the last cylinder. Getting that documentation right is not a formality; it is the evidence base that protects every party when a question arises during construction or years later. Our technicians, dispatched from the Salt Lake City regional hub, perform ASTM-compliant field and laboratory testing of concrete, aggregate, and soil on a scheduled or project-based basis, delivering defensible reports under a documented quality system so your project record is complete and your schedule is not held up waiting for data.
Utah's Wasatch Front valley soils frequently include lacustrine silts and clays of variable compressibility alongside coarser alluvial materials, making accurate soil classification and compaction verification especially important for foundation and embankment work. Cold winters and intense summer UV and low humidity require attention to ACI 305R and ACI 306R temperature and evaporation criteria during concrete placement to keep test results meaningful and mixes performing as designed.
FAQ · Provo
Provo winters can freeze the ground — how does that affect Proctor and density testing on our earthwork schedule?
Frozen or frost-affected material cannot be properly compacted or tested; ASTM D698 and D1557 Proctor procedures require unfrozen, representative samples. When ambient or ground temperatures approach freezing, our technicians will note conditions in the report, and nuclear density readings per ASTM D6938 should be treated with caution until ground temperatures recover. Plan earthwork placement windows accordingly and coordinate with the project geotechnical engineer on freeze-depth monitoring.
Utah County is growing fast — can you handle both small residential-foundation pours and large commercial concrete placements?
Yes. Technicians dispatched from the Salt Lake City hub can be scheduled for pours of any scale. Each visit covers fresh concrete testing per ASTM C172 (sampling), C143 (slump), C231 or C173 (air content), C1064 (temperature), and C138 (unit weight), plus casting cylinders per ASTM C31. Cylinder break schedules — 7-day, 28-day, or project-specified — are coordinated to match your submittal and pay-application milestones.
Some Provo-area projects sit on Lake Bonneville lake-bed soils. What classification and testing do you perform on those materials?
For fine-grained or variable soils, we perform Atterberg limits per ASTM D4318, grain-size analysis per ASTM D422 or D6913, and classification per the Unified Soil Classification System (ASTM D2487). These results inform compaction specifications and help the geotechnical engineer evaluate consolidation risk. Moisture-density relationships are established by ASTM D698 or D1557, and field compaction is verified by nuclear gauge per ASTM D6938 or sand-cone per ASTM D1556.
How fast can a technician be on site in Provo?
Provo work is dispatched through our Salt Lake City, UT regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Provo, UT?
Field work in Provo is dispatched through the Salt Lake City, UT regional hub, about 39 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Provo projects.
Are the technicians you send to Provo certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Utah agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring: we staff this work locally. Field technician openings in Provo · all positions.
Scheduling & proposals
Need construction materials testing in Provo?
Call to schedule a technician, or send project documents for a written proposal.