Home / Services / Forensic / Orem, UT
Orem, Utah
Forensic Engineering in Orem, UT
Failure investigation on distressed concrete, foundations, and pavements: coring, sampling, laboratory analysis, and licensed engineers for opinion and testimony. Orem and the surrounding UT area is covered on a project basis through our Salt Lake City, UT regional hub.
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Orem and the surrounding UT area — Salt Lake City, West Valley City, Provo
- Coverage
- Utah statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Utah
- Call us
- (346) 420-5425
Scope
Forensic services in Orem
- Concrete distress investigation: cracking, scaling, spalling, low strength results
- Core sampling and testing of hardened concrete per ASTM C42
- Petrographic examination of hardened concrete per ASTM C856
- Foundation and pavement performance investigations
- Documented chain of custody and photo documentation built for litigation
Full scope, standards list, and pricing basis: Forensic Engineering.
Local conditions
Forensic conditions in Orem
Utah County's rapid growth has placed a wide range of structures on some demanding ground. The Wasatch Front corridor around Orem sits at the transition between alluvial valley fill and the steeper terrain rising toward the Wasatch Range, and concrete placed during Utah's short but extreme freeze-thaw seasons faces conditions that can accelerate distress in ways that are not always obvious at first inspection. When a foundation moves, a pavement deteriorates prematurely, or structural concrete shows cracking that raises liability questions, the investigation needs to be systematic and defensible from the moment the first core is taken. We coordinate field evidence collection — coring, sampling, and condition documentation — through our Salt Lake City regional hub, apply laboratory analysis under a documented quality system, and engage licensed engineers for the formal evaluation, written opinion, and, where required, testimony. Every step follows established chain-of-custody procedures so that findings are prepared for review.
Much of the developable land in the Orem area includes variably compacted alluvial soils that can behave inconsistently under load, and Utah's wide annual temperature swings — including freeze-thaw cycling that affects both exposed concrete and near-surface subgrades — are common contributing factors in foundation and pavement distress investigations.
FAQ · Orem
What is chain of custody, and why does it matter for a forensic investigation in Orem?
Chain of custody is a documented record showing who collected each core or sample, how it was handled, and how it traveled from the field to the laboratory. In any dispute — insurance, litigation, or design-build arbitration — opposing parties will scrutinize whether evidence was compromised after collection. We maintain written custody records from the moment a core is extracted through final laboratory disposition, so the integrity of every specimen is traceable and defensible.
How does Utah's freeze-thaw climate affect what the laboratory looks for in a concrete failure investigation?
Repeated freezing and thawing can cause paste deterioration, aggregate pop-out, and scaling that may resemble — but is physically distinct from — low w/c ratio problems or inadequate air entrainment. Petrographic examination per ASTM C856 allows a laboratory analyst to distinguish freeze-thaw attack from other deterioration mechanisms, which matters significantly when determining whether distress originated in materials, mix design, placement practices, or service conditions.
What coring standard governs how concrete specimens are extracted from a distressed structure?
Field cores are obtained and prepared following ASTM C42, which specifies drill orientation, minimum core diameter relative to aggregate size, end preparation, and moisture conditioning before compressive strength testing. Deviating from C42 requirements can introduce variability that undermines strength results, so technician adherence to the standard is critical — particularly when cores will be used to support or refute a strength-deficiency claim.
Which office covers forensic in Orem, UT?
Field work in Orem is dispatched through the Salt Lake City, UT regional hub, about 33 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Orem projects.
Are the technicians you send to Orem certified?
Field sampling and testing in Orem are performed by our ACI- and NICET-certified technicians. Forensic engineering and professional services are delivered with professionals licensed in Utah, coordinated under one proposal.
Hiring: we staff this work locally. Field technician openings in Orem · all positions.
Scheduling & proposals
Need forensic engineering in Orem?
Call to schedule a technician, or send project documents for a written proposal.