Home / Services / Geotechnical / Orem, UT
Orem, Utah
Geotechnical Engineering in Orem, UT
Subsurface investigations, laboratory soils testing, and geotechnical reporting to characterize site conditions before design and verify them during construction. Orem and the surrounding UT area is covered on a project basis through our Salt Lake City, UT regional hub.
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Orem and the surrounding UT area — Salt Lake City, West Valley City, Provo
- Coverage
- Utah statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Utah
- Call us
- (346) 420-5425
Scope
Geotechnical services in Orem
- Soil borings and sampling programs sized to the structure and site
- Laboratory index testing: Atterberg limits (ASTM D4318), moisture content (ASTM D2216)
- Moisture-density relationships and bearing evaluation for foundations and pavements
- Expansive-soil characterization for slab and pavement design
- Construction-phase verification: proof rolls, subgrade acceptance, fill placement observation
ASTM D4318ASTM D2216ASTM D698ASTM D1557
Full scope, standards list, and pricing basis: Geotechnical Engineering.
Local conditions
Geotechnical conditions in Orem
Building in Orem means working with the geology of the Wasatch Front — a region where valley fill soils, alluvial fan deposits, and the proximity to the Wasatch Fault zone all carry direct consequences for foundation design, earthwork specifications, and long-term settlement performance. Seasonal frost cycles, snowmelt-driven moisture fluctuation, and the area's rapid pace of residential, commercial, and mixed-use development make a rigorous subsurface investigation more than a regulatory checkbox. Our geotechnical services for Orem projects cover subsurface exploration through soil borings and test pits, laboratory soils testing performed under a documented quality system, and engineering reports that translate subsurface data into actionable design recommendations. Coverage is dispatched through our Salt Lake City regional hub, approximately 33 miles from Orem, on a scheduled and project-based basis. From early site characterization through construction-phase verification, our field technicians and geotechnical staff deliver the data your design and construction teams need to move forward with confidence.
Soils along the Wasatch Front often include loose to medium-dense alluvial and lacustrine deposits — remnants of ancient Lake Bonneville — that can exhibit compressibility, liquefaction susceptibility, or expansion characteristics depending on depth and composition. Utah's freeze-thaw cycles and spring moisture changes can affect subgrade performance, making soil classification and moisture-density relationships critical inputs for any project breaking ground in the Orem area.
FAQ · Orem
Our Orem site is near the Wasatch Front — do we need to address liquefaction potential in the geotechnical report?
Liquefaction screening is a standard consideration for sites in the Wasatch Front region given the proximity to active fault systems and the presence of loose, saturated alluvial or lacustrine soils at depth. A site-specific geotechnical investigation evaluates subsurface conditions against seismic design parameters established under IBC Chapter 16 and ASCE 7. If susceptible soils are identified, the report will address mitigation options for the structural engineer's use.
What ASTM tests are typically performed on soils collected from an Orem-area investigation?
Common laboratory tests include grain-size analysis (ASTM D6913 / D7928), Atterberg limits (ASTM D4318), moisture content (ASTM D2216), and standard or modified Proctor compaction (ASTM D698 / D1557). Consolidation testing (ASTM D2435) may apply where compressible fine-grained soils are encountered. The specific test program is scoped based on the soil types actually recovered and the demands of the project type.
When during the project schedule should we bring in geotechnical services for a new Orem commercial development?
Subsurface investigation should occur during the pre-design phase so that boring logs, laboratory data, and bearing capacity recommendations are in hand before structural and civil design begins. Starting early avoids costly redesigns if unexpected soil conditions are found. For construction-phase work — subgrade verification, compaction testing per ASTM D6938 or D1556 — scheduling through our Salt Lake City hub in advance of earthwork mobilization keeps the project on track.
Which office covers geotechnical in Orem, UT?
Field work in Orem is dispatched through the Salt Lake City, UT regional hub, about 33 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Orem projects.
Are the technicians you send to Orem certified?
Field sampling and testing in Orem are performed by our ACI- and NICET-certified technicians. Geotechnical engineering and professional services are delivered with professionals licensed in Utah, coordinated under one proposal.
Hiring: we staff this work locally. Field technician openings in Orem · all positions.
Scheduling & proposals
Need geotechnical engineering in Orem?
Call to schedule a technician, or send project documents for a written proposal.