Home / Services / Materials Testing / Gwinnett County, GA
Gwinnett County, Georgia
Construction Materials Testing in Gwinnett County, GA
Concrete, soil, and aggregate testing in Gwinnett County, Georgia — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Atlanta, GA regional hub (26 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Gwinnett County, GA — Atlanta, Columbus, Augusta
- Coverage
- Georgia statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Gwinnett County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Gwinnett County
Gwinnett County has been one of Georgia's fastest-growing counties for decades, and that growth shows no sign of slowing. From mixed-use developments along the SR-316 corridor to distribution centers, multifamily housing, and school construction throughout the county, the pace of building demands testing and inspection that keeps up without cutting corners. Georgia's Piedmont soils — often residual clays and weathered saprolite — require careful classification and compaction verification before any foundation or pavement section goes in. Concrete placements face real scheduling pressure from the region's hot, humid summers, where slump loss and accelerated set times can compromise strength if field conditions aren't documented at the point of placement. Our ACI- and NICET-certified technicians dispatch from our Atlanta regional hub to provide ASTM-compliant field and laboratory testing of concrete, soil, and aggregate, supported by a laboratory operating under a documented quality system and reporting prepared for third-party review.
Gwinnett County's Piedmont geology commonly yields residual clay soils with variable plasticity that respond poorly to moisture fluctuations, making Proctor compaction curves and in-place density verification critical steps on any grading or foundation scope. Georgia's extended warm season also compresses the working window for cold-weather concrete provisions, but summer heat and humidity routinely demand close attention to fresh concrete temperature, water-to-cementite ratio, and curing practice at the time of placement.
FAQ · Gwinnett County
How do Georgia's Piedmont clay soils affect what soil testing I need to order?
Residual Piedmont clays common in Gwinnett County can exhibit high plasticity and shrink-swell behavior, so soil classification under ASTM D2487 and Atterberg limits testing under ASTM D4318 are typically specified before earthwork begins. Compaction control then requires a moisture-density relationship established by ASTM D698 or D1557, matched to the specification's compaction standard, so field nuclear gauge readings are compared against the correct curve for the actual material being placed.
Gwinnett County summers are hot — does heat affect how fresh concrete is tested?
Yes. ASTM C1064 requires concrete temperature to be measured and recorded at the point of delivery, and Georgia's summer ambient temperatures can push mix temperatures toward specification limits quickly. High temperature accelerates hydration, compresses the time window for slump testing per ASTM C143 and air content testing per ASTM C231, and can reduce 28-day cylinder strengths if curing is inadequate. Our technicians document conditions at placement, not just mix ticket data.
What aggregate testing is typically required for concrete or base course work in the Atlanta metro region?
Aggregate quality for structural concrete commonly includes sieve analysis per ASTM C136, material finer than the No. 200 sieve per ASTM C117, and soundness testing. For base course and subbase, gradation under ASTM C136 and D1140 applies alongside Los Angeles abrasion testing per ASTM C131 when required by the specification. Local DOT and county project specifications may call out additional quality criteria; our technicians test to the designated ASTM edition your specification cites.
How fast can a technician be on site in Gwinnett County?
Gwinnett County work is dispatched through our Atlanta, GA regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Gwinnett County, GA?
Field work in Gwinnett County is dispatched through the Atlanta, GA regional hub, about 26 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Gwinnett County projects.
Are the technicians you send to Gwinnett County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Georgia agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Gwinnett County?
Call to schedule a technician, or send project documents for a written proposal.