Home / Services / Materials Testing / Augusta, GA
Augusta, Georgia
Construction Materials Testing in Augusta, GA
Concrete, soil, and aggregate testing in Augusta, Georgia — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Charlotte, NC regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Augusta and the surrounding GA area — Atlanta, Columbus, Savannah
- Coverage
- Georgia statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Augusta
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Augusta
Augusta sits at the fall line between the Piedmont and the Coastal Plain, a geological boundary that gives the region a notably variable soil profile — red clay-bearing Piedmont residual soils in some project corridors, looser sandy fills and alluvial deposits in others. That variability matters for every foundation, pavement, and embankment project in the metro, from the industrial and logistics development pushing along the I-20 corridor to the healthcare, education, and municipal work active across the CSRA. Getting soil classification, compaction verification, and concrete quality right from the first lift to the final cylinder break is not optional — it is what keeps schedules, specifications, and structural integrity intact. Our certified technicians, dispatched through our Charlotte regional hub, perform ASTM-compliant field and laboratory testing of concrete, aggregate, and soil for contractors, developers, and engineers working in Augusta and the surrounding region, backed by a documented quality system and reporting prepared for third-party review.
Augusta's transition zone between Piedmont residual clays and Coastal Plain sands means soil bearing and compaction behavior can shift significantly across a single site, making thorough classification and Proctor-referenced density testing critical. The region's hot, humid summers also place real demands on fresh concrete — high ambient temperatures accelerate slump loss and hydration, making timely field testing to ASTM C172 and C143 essential for QA on flatwork and structural pours.
FAQ · Augusta
Our project is on the Augusta Coastal Plain side — sandy, loose subgrade. What soil testing do we actually need?
Sandy Coastal Plain soils typically require classification under ASTM D2487 to confirm unified soil class, moisture-density relationship (Proctor) testing per ASTM D698 or D1557 depending on your compaction specification, and in-place density verification by nuclear gauge under ASTM D6938 or sand-cone per ASTM D1556. If bearing capacity is a concern, your geotechnical engineer of record should direct which supplemental tests apply.
How does the Augusta summer heat affect when concrete cylinders need to be made and cured on site?
ASTM C31 governs field cylinder fabrication and initial curing. In Augusta's high-heat summers, keeping freshly cast cylinders in the specified temperature range of 60–80°F for the first 24 hours requires shading and sometimes insulated curing boxes on site. Heat also accelerates slump loss, so technicians should perform ASTM C143 slump testing promptly after sampling to capture true workability at the point of placement.
The City of Augusta or GDOT is the owner — will your reports satisfy their documentation requirements?
Our reports document sample identification, test conditions, results, and applicable ASTM designations in a format structured for owner and agency review. For GDOT-administered work, specifications typically reference GDOT standard specifications alongside ASTM methods; confirm with your project engineer which specific test designations and forms are required so we can align reporting accordingly. Our technicians hold ACI and NICET certifications consistent with most public-agency field-tech requirements.
How fast can a technician be on site in Augusta?
Augusta work is dispatched through our Charlotte, NC regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Augusta, GA?
Field work in Augusta is dispatched through the Charlotte, NC regional hub, about 137 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Augusta projects.
Are the technicians you send to Augusta certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Georgia agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Augusta · all positions.
Scheduling & proposals
Need construction materials testing in Augusta?
Call to schedule a technician, or send project documents for a written proposal.