Home / Services / Materials Testing / Summit County, OH
Summit County, Ohio
Construction Materials Testing in Summit County, OH
Concrete, soil, and aggregate testing in Summit County, Ohio — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Columbus, OH regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Summit County, OH — Columbus, Cleveland, Cincinnati
- Coverage
- Ohio statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Summit County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Summit County
Summit County sits within the glaciated northeastern Ohio landscape, where legacy industrial redevelopment, institutional construction, and ongoing infrastructure work all depend on materials that perform through freeze-thaw cycling, wet spring conditions, and soils shaped by glacial till and lacustrine deposits. Concrete placed during Ohio's shoulder seasons requires careful fresh-concrete testing to confirm air content, slump, and temperature before placement—conditions that vary project to project. Compressible or variable fill conditions common to urban infill and brownfield sites demand thorough soil classification and compaction verification before structural loads are applied. Our firm dispatches certified field technicians to Summit County from its Columbus, OH regional hub for scheduled and project-based coverage, performing ASTM-compliant testing of concrete, aggregate, and soil under a documented quality system. Reports are written to support engineers, contractors, and owners through submittal review, pay disputes, and regulatory documentation—not just to fill a project file.
Northeastern Ohio's glacial till and lacustrine clay soils can exhibit variable bearing capacity and moisture sensitivity, making Proctor compaction baselines and in-place density verification particularly important on grading and utility projects. Cold-weather and wet-season concrete placements are routine across the region, and fresh concrete testing for air content and temperature at point of discharge is essential to protecting mix performance through Ohio's extended freeze-thaw cycles.
FAQ · Summit County
Summit County winters are long—what fresh concrete tests are required when temperatures drop toward freezing?
When concrete is placed in cold-weather conditions, ACI 305R and ACI 306R guide temperature management practices, and fresh-concrete testing under ASTM C1064 is the standard method for recording concrete temperature at point of discharge. Air content testing per ASTM C231 is equally critical, since adequate entrained air is the primary defense against freeze-thaw scaling. Your specification should define minimum placement and protection temperatures, and our technicians document conformance at every tested load.
We're building on a brownfield site in Akron—what soil testing do you recommend before we place structural fill?
On urban infill and brownfield sites, soil classification per ASTM D2487 and Atterberg limits testing per ASTM D4318 help characterize existing subgrade and proposed fill materials. A moisture-density relationship (Proctor) test per ASTM D698 or D1557 establishes the compaction standard, and nuclear or sand-cone density testing verifies field conformance. Corrosivity testing—pH, resistivity, chloride, and sulfate—is also advisable where buried utilities or steel elements are planned.
Can you cover both field sampling and cylinder break testing for a project in Summit County?
Yes. Our technicians perform field sampling and fabrication of concrete test cylinders per ASTM C172 and ASTM C31, documenting fresh properties including slump (ASTM C143), air content (ASTM C231), temperature (ASTM C1064), and unit weight (ASTM C138). Cylinders are transported to our laboratory for curing and compressive strength testing per ASTM C39. The chain of custody from field to break is documented within a single report, supporting your project record and engineer of record review.
How fast can a technician be on site in Summit County?
Summit County work is dispatched through our Columbus, OH regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Summit County, OH?
Field work in Summit County is dispatched through the Columbus, OH regional hub, about 110 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Summit County projects.
Are the technicians you send to Summit County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Ohio agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Summit County?
Call to schedule a technician, or send project documents for a written proposal.