Home / Services / Materials Testing / Cincinnati, OH
Cincinnati, Ohio
Construction Materials Testing in Cincinnati, OH
Concrete, soil, and aggregate testing in Cincinnati, Ohio — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Columbus, OH regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Cincinnati and the surrounding OH area — Columbus, Cleveland, Toledo
- Coverage
- Ohio statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Cincinnati
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Cincinnati
Cincinnati sits at the convergence of the Ohio River valley and the glaciated till plains of southwestern Ohio — a combination that puts a wide range of soil conditions under nearly every foundation, from stiff glacial clays in the upland neighborhoods to variable fill and alluvial deposits along the riverfront. Seasonal temperature swings are wide enough to compress the reliable concrete-placement window in winter and demand careful hydration attention in summer, making field testing at the point of placement a practical necessity rather than a formality. Developers building mixed-use corridors, contractors working public infrastructure, and engineers of record managing commercial and industrial sites across Hamilton, Clermont, and Warren counties rely on documented materials data to protect schedules, satisfy project specifications, and support inspection programs under IBC Chapter 17. Dispatched through the Columbus regional hub, our ACI- and NICET-certified technicians perform ASTM-compliant concrete, aggregate, and soil testing on a scheduled and project-based basis, with reporting prepared for third-party review.
Southwestern Ohio's glacial till soils — commonly stiff, lean clays and silty clays — can exhibit significant variation in bearing and compaction behavior across a single site, making in-place density verification and laboratory Proctor correlation especially important on grading and foundation work. Cincinnati's climate, with meaningful freeze-thaw cycling each winter, also makes proper air-entrainment verification during fresh concrete testing a practical quality-control priority for flatwork and structural pours placed in the shoulder seasons.
FAQ · Cincinnati
We're grading a site in Warren County with variable fill over glacial clay. What soil testing program should we expect?
A typical program for that profile includes moisture-density relationship testing per ASTM D698 or D1557 (Standard or Modified Proctor, depending on your specification), soil classification per ASTM D2487, and in-place density verification by nuclear gauge per ASTM D6938 or sand-cone per ASTM D1556. Where fill material sources vary across the site, separate Proctor curves are required for each distinct material to give the compaction control data meaning.
Winter concrete placements are common on our Cincinnati schedule. What fresh concrete tests matter most in cold weather?
In cold-weather placements, concrete temperature at point of delivery is measured alongside the standard fresh-test suite — slump per ASTM C143, air content per ASTM C231, unit weight per ASTM C138, and temperature per ASTM C1064. ACI 306 sets the accepted temperature range for fresh concrete in cold conditions. Cylinder sets are also cast and protected per ASTM C31; documentation of protection and curing conditions during the hold period is part of the technician's field record.
Hamilton County requires a special inspection program on our structural concrete. How does materials testing fit into that?
IBC Chapter 17 special inspection for concrete typically requires continuous or periodic inspection of mixing, placement, and consolidation, combined with sampling and strength testing of concrete per ASTM C172 and C39. The statement of special inspections prepared by the engineer of record defines the frequency and scope. Our technicians document observations and test results in field reports formatted to satisfy the statement of special inspections and the building department's submittal requirements.
How fast can a technician be on site in Cincinnati?
Cincinnati work is dispatched through our Columbus, OH regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Cincinnati, OH?
Field work in Cincinnati is dispatched through the Columbus, OH regional hub, about 100 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Cincinnati projects.
Are the technicians you send to Cincinnati certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Ohio agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Cincinnati · all positions.
Scheduling & proposals
Need construction materials testing in Cincinnati?
Call to schedule a technician, or send project documents for a written proposal.