Home / Services / Materials Testing / Akron, OH
Akron, Ohio
Construction Materials Testing in Akron, OH
Concrete, soil, and aggregate testing in Akron, Ohio — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Columbus, OH regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Akron and the surrounding OH area — Columbus, Cleveland, Cincinnati
- Coverage
- Ohio statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Akron
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Akron
Akron sits at the edge of northeastern Ohio's glaciated lake plain, where project sites can expose a mixed profile of glacial till, lacustrine clay, and weathered shale — soil conditions that demand reliable compaction data and classification work, not approximations. The region's freeze-thaw cycle is aggressive: concrete placed in spring or fall shoulder seasons here requires careful fresh-concrete testing to confirm air entrainment, slump, and temperature are within spec before a single yard is placed. Whether you are building a warehouse near the industrial corridors, a mixed-use development downtown, or expanding a logistics facility along one of the regional freight corridors, your structural decisions depend on test data prepared for third-party review. Our certified field technicians, dispatched through our Columbus regional hub, provide ASTM-compliant testing of concrete, aggregate, and soil — backed by a documented quality system and reports written to be defensible from pour day through final closeout.
Northeastern Ohio's glacially derived soils — including stiff clays and variable fills — frequently require Proctor compaction curves and soil classification testing early in a project to establish reliable field density targets; the region's cold winters and wet springs also create extended periods when concrete placement temperature and air content must be monitored closely to protect structural integrity.
FAQ · Akron
What soil classification testing do you perform, and why does it matter on Akron-area sites?
We perform USCS and AASHTO classification testing — including Atterberg limits (ASTM D4318), sieve analysis (ASTM D6913), and hydrometer analysis (ASTM D7928) where fine-grained fractions are present. On northeastern Ohio sites where glacial till and clay-rich soils are common, classification work establishes whether native material is suitable for reuse as structural fill or requires amendment, directly affecting your subgrade design and fill acceptance criteria.
What compaction testing standard applies to ODOT or local agency roadway and utility work in Akron?
Most ODOT-referenced and locally administered projects in Ohio specify compaction acceptance based on the Standard Proctor (ASTM D698) or Modified Proctor (ASTM D1557) moisture-density relationship, with field density confirmed by nuclear gauge (ASTM D6938) or sand cone (ASTM D1556). Our technicians hold NICET certification and are familiar with the documentation format agencies expect for public-right-of-way and utility corridor projects.
How do cold-weather conditions in Akron affect fresh concrete testing requirements?
ACI 306 defines cold-weather concreting as any period when ambient temperature is below 40°F or when temperatures are expected to drop below 40°F within 24 hours. During these conditions — routine from November through March in northeastern Ohio — our technicians verify concrete temperature at point of delivery per ASTM C1064 alongside air content (ASTM C231) and slump (ASTM C143), providing the documentation contractors and engineers need to defend placement decisions.
How fast can a technician be on site in Akron?
Akron work is dispatched through our Columbus, OH regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Akron, OH?
Field work in Akron is dispatched through the Columbus, OH regional hub, about 110 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Akron projects.
Are the technicians you send to Akron certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Ohio agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Akron · all positions.
Scheduling & proposals
Need construction materials testing in Akron?
Call to schedule a technician, or send project documents for a written proposal.