Home / Services / Materials Testing / Spokane, WA
Spokane, Washington
Construction Materials Testing in Spokane, WA
Concrete, soil, and aggregate testing in Spokane, Washington — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Seattle, WA regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Spokane and the surrounding WA area — Seattle, Tacoma, Vancouver
- Coverage
- Washington statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Spokane
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Spokane
Spokane sits at the edge of the Columbia Plateau, where basaltic rock close to the surface gives way in river corridors to glaciofluvial gravels and silty soils that behave differently from project to project. Winter temperatures routinely push concrete placement into cold-weather protocol territory under ACI 306, and the region's active construction pipeline — spanning commercial development, highway work, and public infrastructure — puts real pressure on contractors and engineers to document material quality at every stage. Our firm dispatches certified field technicians from our Seattle regional hub to cover Spokane-area projects on a scheduled and project-based basis. From fresh concrete testing and cylinder breaks to Proctor compaction, nuclear density, aggregate gradation, soil classification, and soil corrosivity, every test is performed by ACI- and NICET-certified technicians under a documented quality system. Results are reported in clear, defensible formats your project team and inspecting authority can rely on.
Spokane-area projects frequently encounter variable subsurface conditions — from dense basaltic material to loose or silty glacial outwash soils — that warrant thorough classification and compaction verification before placing structural fills or foundations. Cold, wet springs and hard freezes in fall and winter also make cold-weather concrete planning and documentation under ACI 306 a practical reality on many local schedules.
FAQ · Spokane
My Spokane project has a Washington State DOT spec for subgrade compaction. Can you test to those requirements using standard ASTM methods?
Yes. Compaction acceptance on WSDOT-influenced projects typically references ASTM D1557 (Modified Proctor) for maximum dry density and ASTM D6938 for nuclear gauge in-place density and moisture. Our technicians establish the laboratory compaction curve and then perform field density tests to the same ASTM edition your specification names, generating documentation that aligns directly with WSDOT reporting expectations.
Spokane winters are cold. How do you document concrete placements when temperatures are borderline for ACI 306 cold-weather requirements?
During cold-weather placements, our technicians record fresh concrete temperature per ASTM C1064 alongside air temperature at the time of placement. Those readings, combined with slump (ASTM C143), air content (ASTM C231), and cylinder fabrication per ASTM C31, create a defensible record that your mix met or was protected to meet ACI 306 criteria — documentation your engineer of record and special inspector of record can reference directly.
Spokane's basaltic geology means we sometimes hit rock, but we also hit silty glacial soils. Can you classify and test both?
Yes. Our technicians perform soil classification under ASTM D2487 (USCS) on samples from borings or excavations, regardless of whether the material is granular glacial outwash, silt, or reworked residual soils overlying basalt. Where engineered fill is placed over any of those native conditions, we verify compaction with ASTM D1556, D6938, or D2167 as appropriate to the material and specification.
How fast can a technician be on site in Spokane?
Spokane work is dispatched through our Seattle, WA regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Spokane, WA?
Field work in Spokane is dispatched through the Seattle, WA regional hub, about 228 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Spokane projects.
Are the technicians you send to Spokane certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Washington agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Spokane · all positions.
Scheduling & proposals
Need construction materials testing in Spokane?
Call to schedule a technician, or send project documents for a written proposal.