Home / Services / Materials Testing / Seattle, WA
Seattle, Washington
Construction Materials Testing in Seattle, WA
Concrete, soil, and aggregate testing in Seattle, Washington — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Seattle, WA regional hub · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Seattle and the surrounding WA area — Spokane, Tacoma, Vancouver
- Coverage
- Washington statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Seattle
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Seattle
Seattle's building environment puts real demands on construction materials. The region's marine climate means concrete placement often happens in cool, humid conditions that affect set times and curing — and Washington's wet seasons compress the windows when earthwork compaction can realistically meet specification. Beneath the surface, Seattle's glacially deposited soils — ranging from dense, well-graded gravels to soft lacustrine clays and liquefiable fills in low-lying areas — require careful characterization before grading, foundation, or retaining-wall work can proceed confidently. Our certified field technicians, dispatched through our Seattle regional hub, perform ASTM-compliant testing of concrete, aggregate, and soil on a scheduled and project-based basis. From fresh concrete sampling and cylinder fabrication to Proctor compaction curves, nuclear density verification, soil classification, and corrosivity analysis, every test is performed under a documented quality system and reported in a format that holds up with inspectors, engineers, and project owners.
Seattle-area projects frequently encounter a mix of glacial till, loose fill, and soft cohesive soils that can behave differently across a single site, making representative sampling and accurate ASTM D1557 or D698 Proctor curves especially important for earthwork quality control. Cool ambient temperatures and high relative humidity during much of the year also require attention to ASTM C1064 fresh concrete temperature limits and ACI 308 curing guidance to protect strength development.
FAQ · Seattle
Seattle has a long rainy season — can earthwork compaction testing still proceed in wet weather?
Compaction testing can proceed in wet weather, but material moisture content is the controlling factor. If in-place soil moisture significantly exceeds the optimum moisture content established by ASTM D1557 or D698, the material is unlikely to achieve the specified relative compaction regardless of roller effort. Our technicians document field conditions and moisture results so the geotechnical engineer of record can make informed acceptance or rejection decisions.
Washington projects often involve structural fill over soft native soils. What testing supports that work?
We perform ASTM D698 and D1557 laboratory Proctor tests to establish the moisture-density relationship for proposed fill materials, then verify in-place density using nuclear gauge methods per ASTM D6938 during placement. Soil classification per ASTM D2487 and Atterberg limit testing per ASTM D4318 help characterize native subgrade conditions so fill design assumptions can be confirmed before grading begins.
Concrete pours in Seattle often happen in temperatures between 40°F and 55°F. What does your technician check for cold-weather placements?
At those temperatures, concrete is technically outside ACI 306 cold-weather concrete thresholds but still at risk for slowed strength gain. Our technicians record fresh concrete temperature per ASTM C1064 at point of discharge, document ambient conditions, and note any heating or insulation measures in the field report. Cylinder curing conditions are documented so the engineer can assess whether field-cured or standard-cured breaks are appropriate for acceptance decisions.
How fast can a technician be on site in Seattle?
Seattle work is dispatched through our Seattle, WA regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Seattle, WA?
Field work in Seattle is dispatched through the Seattle, WA regional hub. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Seattle projects.
Are the technicians you send to Seattle certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Washington agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring: we staff this work locally. Field technician openings in Seattle · all positions.
Scheduling & proposals
Need construction materials testing in Seattle?
Call to schedule a technician, or send project documents for a written proposal.