Home / Services / Materials Testing / Lyon County, NV
Lyon County, Nevada
Construction Materials Testing in Lyon County, NV
Concrete, soil, and aggregate testing in Lyon County, Nevada — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Sacramento, CA regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Lyon County, NV — Las Vegas, Henderson, Reno
- Coverage
- Nevada statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Lyon County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Lyon County
Lyon County is one of Nevada's fastest-growing counties, with residential subdivisions, light industrial parks, and infrastructure projects expanding steadily across the high desert floor between the Sierra Nevada foothills and the Great Basin. Building in this environment means contending with soils that can range from loose alluvial deposits and expansive clays to alkali-laden silts — conditions that demand verified compaction, classification, and corrosivity data before a slab is poured or a retaining wall is backfilled. Seasonal temperature swings also create real risk for fresh concrete: cold overnight lows in winter and high summer temperatures both affect set time and early strength gain. Our firm dispatches certified field technicians from our Sacramento regional hub to provide ASTM-compliant concrete, aggregate, and soil testing on a scheduled or project-based basis. Field work and laboratory analysis run under a documented quality system, producing reports prepared for third-party review.
High desert soils in the western Nevada region frequently exhibit low plasticity with variable fines content and can carry elevated soluble sulfate or chloride concentrations, making soil classification per ASTM D2487 and corrosivity screening routine steps before foundation and underground utility work. Contractors should also plan concrete placements with temperature extremes in mind, as Lyon County's diurnal temperature swings can push fresh concrete outside the placement temperature range recognized in ACI 305R and ACI 306R during summer afternoons and winter mornings respectively.
FAQ · Lyon County
Lyon County grading permits often require compaction reports for engineered fill — what testing does that typically involve, and which ASTM methods apply?
Engineered fill documentation typically requires a laboratory-established moisture-density relationship (ASTM D698 for Standard Proctor or ASTM D1557 for Modified Proctor) and field in-place density testing (ASTM D6938 by nuclear gauge or ASTM D1556 by sand cone). Results are compared against the specified relative compaction percentage and reported with enough detail to satisfy grading plan reviewers and the engineer of record.
We're building a tilt-up warehouse in Lyon County. What concrete testing does the structural engineer typically require for slab and panel pours?
For tilt-up construction, the structural engineer's special inspection program under IBC Chapter 17 commonly requires fresh concrete testing at the point of placement — slump (ASTM C143), air content (ASTM C231), temperature, and unit weight (ASTM C138) — along with a minimum of one set of compressive-strength cylinders (ASTM C31 for fabrication, ASTM C39 for breaks) per designated volume or pour day. Panel and slab pours are typically tracked separately.
How far out do we need to schedule a technician for a Lyon County project, and is same-day dispatch available?
Lyon County is covered by dispatch from our Sacramento regional hub, approximately 128 miles out. We provide scheduled and project-based coverage; advance scheduling is the standard arrangement for this coverage area. Same-day dispatch is not a service we offer here. Coordinating inspection windows during pour scheduling and earthwork phases keeps your testing cadence predictable and avoids hold-ups waiting on density or strength data.
How fast can a technician be on site in Lyon County?
Lyon County work is dispatched through our Sacramento, CA regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Lyon County, NV?
Field work in Lyon County is dispatched through the Sacramento, CA regional hub, about 128 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Lyon County projects.
Are the technicians you send to Lyon County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Nevada agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Lyon County?
Call to schedule a technician, or send project documents for a written proposal.