Home / Services / Materials Testing / Reno, NV
Reno, Nevada
Construction Materials Testing in Reno, NV
Concrete, soil, and aggregate testing in Reno, Nevada — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Sacramento, CA regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Reno and the surrounding NV area — Las Vegas, Henderson, North Las Vegas
- Coverage
- Nevada statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Reno
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Reno
Reno's construction market moves fast — warehouse and logistics facilities, mid-rise residential, and infrastructure work are reshaping the valley floor and pushing into terrain where soils shift from alluvial gravels near the river to expansive clays and decomposed volcanic material as elevation rises. Concrete work here also faces a wide seasonal temperature swing: summer heat accelerates hydration and threatens strength gain, while fall and spring nights can push fresh concrete into conditions requiring cold-weather precautions under ACI 306. Getting materials testing right from the first pour and the first compaction lift is not a compliance formality — it is how projects stay on schedule and how engineers defend their decisions when questions arise later. Our certified technicians dispatch to Reno job sites on a scheduled and project-based basis, performing ASTM-compliant field and laboratory testing of concrete, soil, and aggregate under a documented quality system, with reports structured to satisfy Nevada agency review and project specification requirements.
Northern Nevada soils can vary considerably across short distances — from well-draining alluvial gravels to fine-grained lacustrine deposits and volcanic materials that may exhibit expansive or collapsible behavior — making soil classification, Proctor compaction testing, and in-place density verification particularly important steps before and during earthwork. Reno's high-desert climate also means concrete placed in summer months is subject to rapid moisture loss and elevated ambient temperatures, conditions that directly affect slump, air content, and cylinder curing protocol under ASTM C31.
FAQ · Reno
Reno summers are hot and dry — how does that affect fresh concrete testing and what do your technicians check for?
High ambient temperatures accelerate cement hydration, reduce slump, and increase the risk of plastic shrinkage cracking. Technicians measure concrete temperature at the point of discharge per ASTM C1064, verify slump per ASTM C143, and check air content per ASTM C231 or C173. When concrete temperature approaches or exceeds 95°F, those readings become critical data for the engineer of record to evaluate against ACI 305 hot-weather placement guidance.
Our earthwork specs require compaction testing on fill that may include decomposed volcanic material. Can you classify and test those soils?
Yes. Technicians perform Proctor moisture-density testing per ASTM D698 or D1557 depending on the specified compactive effort, and soils are classified per ASTM D2487 (USCS). Decomposed volcanic and fine-grained lacustrine soils common in parts of the Reno valley may require special attention to optimum moisture determination, which is why laboratory-established Proctor curves — not assumed values — are the correct reference for field density verification.
How is scheduling handled for Reno projects given dispatch is out of Sacramento?
Reno coverage is dispatched through our Sacramento regional hub, approximately 112 miles away. Technician deployment is coordinated on a scheduled and project-based basis — not on-demand same-day response. Contractors and project teams should coordinate testing needs in advance with our project coordination staff so technician scheduling, travel time, and specimen transport logistics are built into the project timeline from the start.
How fast can a technician be on site in Reno?
Reno work is dispatched through our Sacramento, CA regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Reno, NV?
Field work in Reno is dispatched through the Sacramento, CA regional hub, about 112 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Reno projects.
Are the technicians you send to Reno certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Nevada agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Reno · all positions.
Scheduling & proposals
Need construction materials testing in Reno?
Call to schedule a technician, or send project documents for a written proposal.