Home / Services / Materials Testing / Davis County, UT
Davis County, Utah
Construction Materials Testing in Davis County, UT
Concrete, soil, and aggregate testing in Davis County, Utah — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Davis County, UT — Salt Lake City, West Valley City, Provo
- Coverage
- Utah statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Davis County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Davis County
Davis County sits at the interface of the Wasatch Front's alluvial fan deposits and the former lakebed soils left by Lake Bonneville — a combination that creates meaningful variability in bearing capacity, drainage behavior, and compressibility across relatively short distances. Add Utah's wide seasonal temperature swings, which compress the usable window for cold-weather concrete placement and complicate moisture conditioning for compaction work, and the need for disciplined materials testing becomes clear on nearly every project. Our technicians, dispatched from the Salt Lake City regional hub, perform ASTM-compliant field and laboratory testing of concrete, soil, and aggregate for residential subdivisions, commercial developments, and infrastructure work throughout the county. Fresh concrete testing, cylinder breaks, Proctor compaction, nuclear density, aggregate gradation, and soil classification are all executed under a documented quality system and reported in a format prepared for third-party review, project documentation, and dispute resolution.
Davis County's subsurface conditions can shift from competent alluvial gravels to softer, more compressible lacustrine soils within a single project boundary, making soil classification and density verification particularly important at the earthwork stage. Utah's cold winters also require careful attention to concrete placement temperatures and protection measures consistent with ACI 306R guidance, which field testing visits can help document.
FAQ · Davis County
How does the Lake Bonneville lakebed geology in parts of Davis County affect my soil testing requirements?
Former lakebed areas can contain fine-grained, low-plasticity silts and clays that are sensitive to moisture change and can be difficult to compact to a stable density. ASTM D2487 classification, Proctor curves per ASTM D698 or D1557, and consistent nuclear or sand-cone density verification per ASTM D6938 or D1556 are especially important in these zones to confirm that fill meets specification before loading.
What concrete temperature and protection documentation can you provide during Utah's cold-weather construction months?
During cold-weather placements, our ACI-certified technicians record fresh concrete temperatures per ASTM C1064 and ambient conditions at the time of sampling. These field records support the protection and curing documentation that ACI 306R recommends. Cylinder sets cured under field conditions alongside lab-cured sets can also be cast to compare maturity and protection effectiveness, generating defensible records if strength questions arise later.
Davis County projects often involve both structural fill and native subgrade. Can you handle both soil classification and compaction testing on the same mobilization?
Yes. A single mobilization can include visual-manual classification and sample collection for ASTM D2487 laboratory classification, moisture-density relationship testing per ASTM D698 or D1557 on representative materials, and nuclear gauge density testing per ASTM D6938 on completed lifts. Combining these tasks on a scheduled visit reduces mobilization costs and keeps earthwork documentation on a consistent timeline.
How fast can a technician be on site in Davis County?
Davis County work is dispatched through our Salt Lake City, UT regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Davis County, UT?
Field work in Davis County is dispatched through the Salt Lake City, UT regional hub, about 16 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Davis County projects.
Are the technicians you send to Davis County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Utah agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Davis County?
Call to schedule a technician, or send project documents for a written proposal.