Home / Services / Materials Testing / Broward County, FL
Broward County, Florida
Construction Materials Testing in Broward County, FL
Concrete, soil, and aggregate testing in Broward County, Florida — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Miami, FL regional hub (25 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Broward County, FL — Jacksonville, Miami, Tampa
- Coverage
- Florida statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Broward County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Broward County
Broward County's construction environment presents a specific set of demands: a high water table across much of the county, sandy coastal soils with variable bearing capacity, and a subtropical climate that compresses concrete placement windows and accelerates moisture-driven degradation. Structural slabs, tilt-up panels, roadway bases, and the dense mix of commercial and residential development that defines cities like Fort Lauderdale, Miramar, and Pembroke Pines all require materials that perform as specified — verified by testing, not assumption. Our firm dispatches certified field technicians to Broward County job sites through our Miami regional hub, covering scheduled and project-based assignments for fresh concrete testing, cylinder breaks, soil compaction, Proctor testing, aggregate gradation and quality, soil classification, and soil corrosivity evaluation. Every test follows the applicable ASTM standard. Every result is documented under our laboratory's quality system and delivered in reports prepared for third-party review by engineers, inspectors, and building officials.
Broward County's predominance of fine sands and organic soils in lower-lying areas means compaction behavior and bearing capacity can vary significantly across a single site, making density verification at each lift critical. South Florida's year-round heat and humidity also affect fresh concrete workability and hydration rates, reinforcing the importance of timely field testing at the point of placement.
FAQ · Broward County
Broward County has a high water table on many sites. Does that affect how compaction testing is performed or which test method applies?
A high water table can limit the depth of moisture-density testing and affect how nuclear gauge readings are interpreted. The governing method for field density is ASTM D6938 (nuclear gauge) or ASTM D1556/D2937 for drive-core applications where conditions allow. Our technicians document depth-to-water where relevant and flag any limitations in the test report so the engineer of record can evaluate compliance with the specification.
South Florida heat can cause rapid slump loss on the truck. What does your technician actually do to capture a valid fresh concrete sample?
The technician composites the sample from the middle portion of the load per ASTM C172 and completes all fresh concrete tests — slump (ASTM C143), air content (ASTM C231), unit weight (ASTM C138), and temperature — within five minutes of sampling. In South Florida's heat, temperature measurement per ASTM C1064 is especially relevant because mix designs often carry maximum placement temperature limits. Results are logged at the point of sampling, not reconstructed afterward.
Broward County Building Division requires special inspection for concrete on permitted commercial projects. Does materials testing satisfy that requirement?
Materials testing — cylinder breaks, fresh concrete observations, and batch ticket review — is a component of special inspection under IBC Chapter 17, but it does not by itself constitute the full special inspection program. The special inspector of record must be approved by the authority having jurisdiction. Our technicians can perform the testing and field observations that feed into that program, coordinated with your approved special inspection plan.
How fast can a technician be on site in Broward County?
Broward County work is dispatched through our Miami, FL regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Broward County, FL?
Field work in Broward County is dispatched through the Miami, FL regional hub, about 25 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Broward County projects.
Are the technicians you send to Broward County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Florida agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Broward County?
Call to schedule a technician, or send project documents for a written proposal.