Home / Services / Survey / Broward County, FL
Broward County, Florida
Land Surveying in Broward County, FL
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Broward County is covered on a project basis through our Miami, FL regional hub.
- Dispatched from
- Miami, FL regional hub (25 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Broward County, FL — Jacksonville, Miami, Tampa
- Coverage
- Florida statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Florida
- Call us
- (346) 420-5425
Scope
Survey services in Broward County
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Broward County
Broward County's built environment sits on low-lying coastal terrain where accurate horizontal and vertical control is not a formality — it is a foundation condition. Finished floor elevations, drainage infrastructure, and FEMA flood zone compliance all hinge on survey data that is precise and tied to the correct vertical datum from the first day of layout. Dense urban infill in Fort Lauderdale, large mixed-use developments along US-1 and I-95 corridors, and active port and industrial work near Port Everglades each impose their own control and sequencing demands. Our crews, dispatched through our Miami regional hub approximately 25 miles from most Broward County project sites, provide boundary, topographic, and construction staking services matched to Florida's regulatory environment. We coordinate directly with project engineers and contractors to keep layout work ahead of field operations, reduce costly rework, and deliver documentation that supports permit submissions and owner records.
Broward County's generally shallow water table and low surface relief make precise vertical control critical at every survey phase — small errors in benchmark selection or rod readings can affect drainage design, finished floor elevation compliance, and FEMA flood zone determinations. South Florida's active wet season, typically June through October, can compress available field days and should be factored into survey scheduling for larger sites.
FAQ · Broward County
How does Broward County's low topography affect vertical control on a topographic survey?
With very little natural grade change across much of Broward County, even minor errors in benchmark selection or leveling loops can produce drainage designs that do not perform as intended. Crews establish vertical control tied to published NAVD 88 benchmarks, run closed level circuits to verify accuracy, and document datum references in deliverables so engineers can confirm finished floor and invert elevations meet site-specific flood zone requirements.
What datum and flood zone documentation should I expect on a survey for a Broward County permit submission?
Survey deliverables reference NAVD 88 as the vertical datum, consistent with FEMA Flood Insurance Rate Map panels that cover Broward County. Topographic and boundary surveys include base flood elevation references where relevant to the parcel's flood zone designation. Contractors and engineers should verify with the permitting jurisdiction — Broward County or the applicable municipal building department — whether an Elevation Certificate prepared by a licensed surveyor is also required before a certificate of occupancy is issued.
Can you perform construction staking for phased site work in Broward County's wet season?
Yes. Phased staking is coordinated through our Miami regional hub and scheduled in segments aligned with your construction sequence. Because South Florida's wet season, roughly June through October, can interrupt outdoor work, we recommend building schedule buffer for staking assignments and confirming control monument conditions after significant rain events. Stakes set in saturated fill or muck soils may require re-establishment; that risk is noted in pre-field coordination.
Which office covers survey in Broward County, FL?
Field work in Broward County is dispatched through the Miami, FL regional hub, about 25 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Broward County projects.
Are the technicians you send to Broward County certified?
Field sampling and testing in Broward County are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Florida, coordinated under one proposal.
Scheduling & proposals
Need land surveying in Broward County?
Call to schedule a technician, or send project documents for a written proposal.