Home / Services / Materials Testing / Albany County, WY
Albany County, Wyoming
Construction Materials Testing in Albany County, WY
Concrete, soil, and aggregate testing in Albany County, Wyoming — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Denver, CO regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Albany County, WY — Cheyenne, Casper, Laramie
- Coverage
- Wyoming statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Albany County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Albany County
Albany County sits at elevation, with high-plains weather that can bring hard freezes well into spring and early fall — conditions that compress construction windows and put real pressure on concrete placement, soil work, and compaction schedules. At the same time, the county supports a steady mix of university-related construction in Laramie, highway infrastructure, and light commercial development, all of which carry public-agency scrutiny and specification requirements that demand defensible test data. Our firm provides ASTM-compliant field and laboratory testing of concrete, aggregate, and soil for projects across Albany County, dispatched through our Denver regional hub. Certified ACI and NICET technicians handle fresh concrete testing, cylinder breaks, aggregate gradation, Proctor and nuclear density, soil classification, and soil corrosivity — with reporting prepared for third-party review. The laboratory operates under a documented quality system.
Albany County's high elevation and semi-arid climate produce wide daily temperature swings that can affect concrete curing rates and moisture conditioning for Proctor testing; cold-weather concrete procedures per ACI 306 are a practical consideration for much of the project year. Subsurface conditions in this part of Wyoming can include variable native soils and expansive clays, making proper soil classification and compaction verification especially relevant to foundation and pavement work.
FAQ · Albany County
What scheduling lead time should I plan for materials testing coverage on an Albany County project?
Coverage is dispatched from our Denver regional hub, approximately 113 miles from Albany County. We ask project teams to schedule field visits in advance rather than assuming next-day availability. For recurring work — concrete placements, earthwork phases — we coordinate a standing schedule. Early contact at project startup helps us sequence technician dispatch around your construction calendar and Wyoming's compressed building season.
How does high altitude in Laramie affect concrete cylinder curing and break results?
Altitude itself does not change ASTM C39 compressive strength procedures, but the reduced air pressure at Laramie's elevation can influence air entrainment readings taken per ASTM C231. Technicians account for this during fresh concrete testing. Initial curing of cylinders on-site must follow ASTM C31 temperature requirements, which is particularly critical given Albany County's cold nights, before cylinders are transported to the laboratory.
My project spec requires cold-weather concrete monitoring — what does that involve on-site?
For cold-weather placements, our ACI-certified technicians document ambient and concrete temperatures per ASTM C1064 and verify that placement conditions align with the project's cold-weather plan, generally referenced against ACI 306 guidelines. We record fresh concrete temperature at point of discharge and note any protection or heating measures in place. This documentation becomes part of the field report tied to each set of test cylinders.
How fast can a technician be on site in Albany County?
Albany County work is dispatched through our Denver, CO regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Albany County, WY?
Field work in Albany County is dispatched through the Denver, CO regional hub, about 113 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Albany County projects.
Are the technicians you send to Albany County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Wyoming agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Albany County?
Call to schedule a technician, or send project documents for a written proposal.