Home / Services / Materials Testing / Laramie, WY
Laramie, Wyoming
Construction Materials Testing in Laramie, WY
Concrete, soil, and aggregate testing in Laramie, Wyoming — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Denver, CO regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Laramie and the surrounding WY area — Cheyenne, Casper, Gillette
- Coverage
- Wyoming statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Laramie
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Laramie
Laramie sits at over 7,000 feet elevation on the high plains of southeastern Wyoming, where hard winters, dramatic freeze-thaw cycles, and wind-driven temperature swings create real performance demands on concrete, compacted subgrades, and structural fill. Expansive and variable native soils across the region add another layer of risk for foundations, pavements, and earthwork that requires verification — not assumption. State highway projects, University of Wyoming campus construction, commercial development along the US-30 and I-80 corridors, and municipal infrastructure all carry specifications that depend on documented, defensible test data. Our certified technicians dispatch from our Denver regional hub to provide ASTM-compliant field and laboratory testing of concrete, aggregate, and soil across Laramie and Albany County. Every program runs under a documented quality system, and reports are structured to satisfy project specifications, owner quality requirements, and the documentation demands of IBC Chapter 17 special inspection programs.
Soils in the Laramie Basin region can include materials with variable plasticity and susceptibility to frost action — conditions that make Proctor compaction baselines and in-place density verification particularly consequential for subgrade and fill acceptance. Concrete placement scheduling in Laramie should account for an extended cold-weather window and the potential for overnight freezing temperatures well into spring and fall, which can affect curing protocols and early-strength gain.
FAQ · Laramie
How do freeze-thaw conditions in Laramie affect my concrete testing program?
Laramie's high altitude and extended cold seasons mean concrete placed outside the summer months may fall under ACI 306R cold-weather precautions. Field testing per ASTM C143 (slump), C231 (air content), and C1064 (temperature) becomes especially important because air entrainment targets and mix temperature minimums need to be confirmed at point of discharge — not assumed — before concrete is placed.
What compaction testing standard applies to Wyoming DOT highway work in Laramie?
Wyoming DOT specifications typically reference a maximum dry density baseline established by ASTM D698 or D1557, with field density verified by nuclear gauge per ASTM D6938 or by sand-cone per ASTM D1556. Our technicians confirm which method and which compaction standard your project specification requires before mobilizing, so the test data directly supports your submittal to WYDOT.
Can you support University of Wyoming or public-agency projects that require third-party special inspection documentation?
Yes. IBC Chapter 17 requires that special inspection be performed by a qualified agency independent of the contractor. Our technicians carry ACI and NICET certifications, and our reports are formatted to support the special inspection statement of compliance and documentation submittals that public owners — including state institutions — typically require at project close-out.
How fast can a technician be on site in Laramie?
Laramie work is dispatched through our Denver, CO regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Laramie, WY?
Field work in Laramie is dispatched through the Denver, CO regional hub, about 113 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Laramie projects.
Are the technicians you send to Laramie certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Wyoming agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Laramie · all positions.
Scheduling & proposals
Need construction materials testing in Laramie?
Call to schedule a technician, or send project documents for a written proposal.