Home / Services / Survey / Edmond, OK
Edmond, Oklahoma
Land Surveying in Edmond, OK
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Edmond and the surrounding OK area is covered on a project basis through our Dallas, TX regional hub.
- Dispatched from
- Dallas, TX regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Edmond and the surrounding OK area — Oklahoma City, Tulsa, Norman
- Coverage
- Oklahoma statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Oklahoma
- Call us
- (346) 420-5425
Scope
Survey services in Edmond
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Edmond
Edmond is one of the fastest-growing cities in Oklahoma, and that growth shows up in the ground before a single footing is poured. Rapid residential and commercial expansion across the metro means construction sites often sit at the edge of established subdivisions, adjacent to utility corridors, or on parcels where prior platting is inconsistent with what is actually in the field. Getting the survey right before grading begins is not a formality — it is how cost overruns, encroachment disputes, and redesign cycles get avoided. Our surveying crews provide boundary, topographic, and construction staking services dispatched through our Dallas regional hub to serve Edmond project schedules. Whether you are staking a pad site on a rolling lot, confirming right-of-way limits before a commercial build, or producing a topographic base map for civil design, we deliver fieldwork and deliverables that match what the design team and the City of Edmond require before permits move forward.
Much of the Edmond area sits on clay-bearing soils that can shift seasonally with Oklahoma's wet-dry cycles, making precise topographic data before grading particularly important for drainage design and foundation planning. Oklahoma's spring storm season can create scheduling pressure; coordinating survey work early in a project timeline helps keep downstream tasks on track.
FAQ · Edmond
Will the survey be tied to the Oklahoma State Plane Coordinate System, and does the City of Edmond require it for permit submittals?
Most municipal and county agencies in the Oklahoma City metro expect survey control referenced to the Oklahoma State Plane Coordinate System (NAD 83, South Zone) for permit and plat submittals. We establish control accordingly so your civil engineer receives a base map ready for design without a coordinate transformation step. Confirm specific submittal requirements with the City of Edmond Planning Department for your project type, as requirements can vary by submission category.
How do expansive clay soils in the Edmond area affect the precision needed in a topographic survey for a drainage design?
Expansive clays common to central Oklahoma are sensitive to moisture change, which means even modest grading decisions can affect long-term drainage patterns and slab performance. A topographic survey capturing one-foot or half-foot contour intervals — and spot elevations at key drainage features — gives civil designers the resolution needed to model sheet flow and detention accurately before earthwork begins. We size the survey scope to match the drainage design requirements you specify.
What horizontal and vertical accuracy standards govern the topographic and boundary work your crews produce?
Boundary surveys follow the minimum standards set by the Oklahoma State Board of Licensure for Professional Engineers and Land Surveyors. Topographic surveys are executed to positional tolerances appropriate for the design scale requested, typically meeting or exceeding the standards in the ASPRS Positional Accuracy Standards for Digital Geospatial Data. We document control network, equipment calibration records, and closure data in every deliverable so your engineer of record can evaluate the work product directly.
Which office covers survey in Edmond, OK?
Field work in Edmond is dispatched through the Dallas, TX regional hub, about 202 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Edmond projects.
Are the technicians you send to Edmond certified?
Field sampling and testing in Edmond are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Oklahoma, coordinated under one proposal.
Hiring for project coverage. Field technician openings in Edmond · all positions.
Scheduling & proposals
Need land surveying in Edmond?
Call to schedule a technician, or send project documents for a written proposal.