Home / Services / Forensic / Edmond, OK

Edmond, Oklahoma

Forensic Engineering in Edmond, OK

Failure investigation on distressed concrete, foundations, and pavements: coring, sampling, laboratory analysis, and licensed engineers for opinion and testimony. Edmond and the surrounding OK area is covered on a project basis through our Dallas, TX regional hub.

Lead time
Set in the proposal, with mobilization planned around your pour and earthwork schedule
Laboratory
Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
Reporting
Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
Serving
Edmond and the surrounding OK area — Oklahoma City, Tulsa, Norman
Coverage
Oklahoma statewide · 27 regional hubs
Technicians
ACI- and NICET-certified field staff; licensed professionals in Oklahoma
Call us
(346) 420-5425

Scope

Forensic services in Edmond

  • Concrete distress investigation: cracking, scaling, spalling, low strength results
  • Core sampling and testing of hardened concrete per ASTM C42
  • Petrographic examination of hardened concrete per ASTM C856
  • Foundation and pavement performance investigations
  • Documented chain of custody and photo documentation built for litigation

ASTM C42ASTM C856ASTM C39

Full scope, standards list, and pricing basis: Forensic Engineering.

Local conditions

Forensic conditions in Edmond

Oklahoma's expansive clay soils — common throughout the Oklahoma City metro and the Edmond area — swell and shrink with seasonal moisture changes in ways that place persistent stress on foundations, slabs, and pavements. When a structure shows distress, the cause is rarely obvious: shrinkage cracking, differential settlement, alkali-silica reactivity, inadequate cover, compaction deficiencies, and construction sequencing errors can each produce similar symptoms. Determining which factor — or which combination — is responsible requires disciplined evidence collection, not guesswork. Our firm dispatches certified field technicians from our Dallas regional hub to Edmond to perform systematic coring, in-place sampling, and condition documentation before the evidence degrades or the site is disturbed. Chain-of-custody handling connects field samples to laboratory analysis conducted under a documented quality system. Licensed engineers engaged for the evaluation review all findings and, where required, provide written opinions and expert testimony. The result is a defensible factual record built on recoverable physical evidence.

Oklahoma's semi-arid climate produces significant wet-dry cycling that accelerates shrinkage and cracking in concrete flatwork and can mask whether distress originated in mix design, placement conditions, or subgrade movement — a distinction that matters enormously in failure investigations. The prevalence of post-tensioned residential foundations in the metro, adopted in part as a response to expansive soil conditions, introduces additional forensic considerations around tendon condition, anchorage, and original design intent.

FAQ · Edmond

What does an expansive-soil foundation investigation in Edmond typically involve?

Technicians collect soil samples for Atterberg limits testing (ASTM D4318) and swell-consolidation testing (ASTM D4546) alongside concrete cores. Floor elevations are mapped to document differential movement patterns. The licensed engineer correlates laboratory soil data with structural observations to distinguish moisture-induced heave from settlement caused by other mechanisms — a distinction that directly affects remediation and liability analysis.

How is physical evidence protected once your team arrives on site?

Technicians photograph and document conditions in place before any sampling begins. Cores and samples are labeled, logged, and transported under documented chain-of-custody procedures consistent with the firm's quality system. This handling record establishes that laboratory results reflect original field conditions, which is essential when findings will be used in dispute resolution, mediation, or litigation.

Can you core an existing post-tensioned slab without severing tendons?

Yes. Before coring any post-tensioned slab, technicians use covermeter scanning and ground-penetrating radar (GPR) to locate tendon positions and plan core locations that avoid them. Cores are taken per ASTM C42. The core locations, tendon-avoidance documentation, and as-drilled data are recorded and transmitted to the reviewing licensed engineer as part of the investigation file.

Which office covers forensic in Edmond, OK?

Field work in Edmond is dispatched through the Dallas, TX regional hub, about 202 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Edmond projects.

Are the technicians you send to Edmond certified?

Field sampling and testing in Edmond are performed by our ACI- and NICET-certified technicians. Forensic engineering and professional services are delivered with professionals licensed in Oklahoma, coordinated under one proposal.

Hiring for project coverage. Field technician openings in Edmond · all positions.

Scheduling & proposals

Need forensic engineering in Edmond?

Call to schedule a technician, or send project documents for a written proposal.

Talk to us

Questions about a project? Send a note.

Nothing here is required — leave a phone number or an email and we'll get back to you. For a written scope, the proposal request form takes plans and specs.

Or call (346) 420-5425 · info@constructionmaterialtesting.com