Home / Services / Survey / Denver County, CO
Denver County, Colorado
Land Surveying in Denver County, CO
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Denver County is covered on a project basis through our Denver, CO regional hub.
- Dispatched from
- Denver, CO regional hub · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Denver County, CO — Denver, Colorado Springs, Aurora
- Coverage
- Colorado statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Colorado
- Call us
- (346) 420-5425
Scope
Survey services in Denver County
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Denver County
Denver County sits at the base of the Rocky Mountain Front Range, where development pressure from one of the country's fastest-growing metros meets a built environment defined by infill redevelopment, transit-oriented mixed-use projects, and urban density within a compact geographic footprint. Accurate survey work is not a formality here—it is the foundation that keeps designs aligned with recorded plats, city right-of-way limits, and the precise benchmarks that Denver's grading and drainage requirements demand. Our firm dispatches survey-ready crews from the Denver regional hub to deliver boundary, topographic, and construction staking services sized for the scope at hand, whether a single infill lot or a phased commercial development. Every survey is performed to professional standards, with deliverables formatted to support your permitting submissions, engineer-of-record sign-off, and downstream construction work—so the design goes on the ground right the first time.
Denver County's urban soils frequently include fill, disturbed material, and clay-bearing profiles that can shift control points if benchmarks are not properly set and protected—something our crews account for when establishing and monitoring control networks on active sites. Colorado's variable weather, including freeze-thaw cycles and late spring snowfall, can affect monument stability and site access, so survey scheduling should account for seasonal ground conditions during the project planning phase.
FAQ · Denver County
Does Denver County require a recorded plat or re-plat before I can pull a building permit for an infill project?
Denver Community Planning and Development typically requires that parcels meet subdivision regulations before a building permit is issued, which may trigger a re-plat for lot consolidations or splits. A current boundary survey establishes the legal parcel geometry your land-use attorney and project engineer need before submitting a re-plat application. Confirm specific submittal requirements directly with Denver CPD, as thresholds depend on project type and zoning district.
How does the high-altitude, semi-arid climate in Denver affect the accuracy or timing of topographic survey work?
Denver's intense UV, low humidity, and rapid temperature swings have minimal effect on modern total station or GNSS equipment, but ground conditions matter. Freeze-thaw cycles in late fall and early spring can heave or displace temporary benchmarks and hubs. Scheduling topographic surveys after the ground has stabilized—and protecting control monuments with protective caps or offsets—helps preserve accuracy through the project's construction phase.
What horizontal and vertical datums are used for construction staking on Denver County public and private projects?
Most Denver County projects reference the Colorado State Plane Coordinate System, Central Zone (FIPS 0502), tied to NAD 83, with vertical control on NAVD 88. Because Colorado sits at elevation, a combined scale factor adjustment is important to avoid accumulating error when converting ground distances to grid. Your project engineer should specify the datum and any project-specific coordinate rotation in the survey control notes so all disciplines are working on a common reference.
Which office covers survey in Denver County, CO?
Field work in Denver County is dispatched through the Denver, CO regional hub. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Denver County projects.
Are the technicians you send to Denver County certified?
Field sampling and testing in Denver County are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Colorado, coordinated under one proposal.
Scheduling & proposals
Need land surveying in Denver County?
Call to schedule a technician, or send project documents for a written proposal.