Home / Services / Survey / Fort Collins, CO
Fort Collins, Colorado
Land Surveying in Fort Collins, CO
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Fort Collins and the surrounding CO area is covered on a project basis through our Denver, CO regional hub.
- Dispatched from
- Denver, CO regional hub (59 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Fort Collins and the surrounding CO area — Denver, Colorado Springs, Aurora
- Coverage
- Colorado statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Colorado
- Call us
- (346) 420-5425
Scope
Survey services in Fort Collins
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Fort Collins
Fort Collins sits at the base of the Front Range where the plains meet the foothills, and that transition creates real variability in grade, drainage, and subsurface conditions across a single parcel. Residential infill in established neighborhoods, commercial development along the US-287 and I-25 corridors, and multifamily projects near Colorado State University all demand survey work that reflects the actual ground—not averaged assumptions. Horizontal and vertical control errors discovered after grading begins cost more to correct than the survey itself. Our crews, dispatched through the Denver regional hub, perform boundary, topographic, and construction staking surveys tied to established control and delivered in formats your design team can use immediately. Every assignment is scoped before mobilization so the deliverable matches what the project engineer, municipality, or title company actually requires—and so the design goes on the ground correctly the first time.
The Front Range urban corridor around Fort Collins experiences a wide swing in freeze-thaw cycles through late winter and early spring, which can shift temporary benchmarks and stakes between site visits; crews should verify control before resuming work after extended cold periods. Northern Colorado's mix of alluvial soils near Cache la Poudre River lowlands and harder, rocky ground toward the foothills means topographic surveys in transition zones may reveal grade breaks and drainage patterns that aren't obvious from aerial data alone.
FAQ · Fort Collins
Does Fort Collins or Larimer County require a recorded plat or survey document before a building permit is issued for a subdivision?
Larimer County and the City of Fort Collins generally require a recorded final plat, prepared and sealed by a Colorado-licensed Professional Land Surveyor, before subdivision building permits are issued. Specific triggering thresholds depend on the number of lots and land-use category. Confirm current requirements with the applicable planning department early in your project timeline so survey work is sequenced ahead of permit submittal.
How does elevation and mountain proximity affect vertical control and benchmark reliability on a Fort Collins project?
At roughly 5,000 feet elevation, NGS-published benchmarks in the Fort Collins area can have adjustment histories that differ from lower-elevation datums. Surveys should be tied to published NAVD 88 benchmarks and that connection documented in the survey report. For projects where finished floor or floodplain elevation is critical, the surveyor of record should confirm the benchmark stability and adjustment epoch used before reporting final elevations.
Our project is near the Cache la Poudre River floodplain. What does a topographic survey need to capture for a FEMA floodplain or LOMA submittal?
A Letter of Map Amendment or floodplain development permit typically requires precise finished-grade and lowest-adjacent-grade elevations tied to NAVD 88, along with topographic data sufficient to compare site grades to the Base Flood Elevation on the applicable FIRM panel. The survey must be signed and sealed by a Colorado-licensed Professional Land Surveyor. Our crew captures the ground data; coordinate with your civil engineer on what FEMA's specific submittal format requires.
Which office covers survey in Fort Collins, CO?
Field work in Fort Collins is dispatched through the Denver, CO regional hub, about 59 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Fort Collins projects.
Are the technicians you send to Fort Collins certified?
Field sampling and testing in Fort Collins are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Colorado, coordinated under one proposal.
Hiring: we staff this work locally. Field technician openings in Fort Collins · all positions.
Scheduling & proposals
Need land surveying in Fort Collins?
Call to schedule a technician, or send project documents for a written proposal.