Home / Services / Materials Testing / Tulsa, OK
Tulsa, Oklahoma
Construction Materials Testing in Tulsa, OK
Concrete, soil, and aggregate testing in Tulsa, Oklahoma — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Kansas City, MO regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Tulsa and the surrounding OK area — Oklahoma City, Norman, Broken Arrow
- Coverage
- Oklahoma statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Tulsa
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Tulsa
Oklahoma's expansive, clay-rich soils shift with seasonal moisture swings, and Tulsa's climate adds freeze-thaw cycles that stress concrete placed without close attention to mix temperature, air entrainment, and curing. For developers pushing commercial and industrial projects across the Tulsa metro, and for contractors working highway, bridge, and site-utility scopes governed by ODOT and local agency specifications, materials testing is not a formality — it is the documented evidence that soil is stable, concrete will perform, and aggregate meets gradation requirements before problems become change orders. Our field technicians, holding current ACI and NICET certifications, dispatch to Tulsa project sites on a scheduled and project-based basis to perform ASTM-compliant testing of concrete, soil, and aggregate. Results are reported through a structured workflow under a documented quality system, producing defensible records ready for submittal to engineers, owners, and governing agencies.
Tulsa-area soils frequently contain expansive clays that require careful Proctor compaction testing (ASTM D698 / D1557) and classification work to establish reliable density targets before earthwork proceeds. Cold-weather concrete placements are a recurring concern from late autumn through early spring, making fresh concrete temperature monitoring and proper cylinder curing discipline critical to producing representative strength data.
FAQ · Tulsa
How do Oklahoma's expansive clay soils affect the compaction testing process on my Tulsa project?
Expansive clays common in the Tulsa area are sensitive to moisture content, which means establishing an accurate optimum moisture-density relationship via ASTM D698 (Standard Proctor) or ASTM D1557 (Modified Proctor) is especially important before field density testing begins. Our technicians use nuclear density gauge testing (ASTM D6938) or sand-cone methods (ASTM D1556) and reference the project-specific Proctor curve to verify compaction meets specification at each lift.
Tulsa winters can be unpredictable — what cold-weather precautions affect concrete cylinder testing?
ACI 306R addresses cold-weather concreting, and fresh concrete temperature is measured at the point of discharge per ASTM C1064 during every field visit. Cylinders must be protected from freezing during the initial 24-hour curing period on site. If ambient conditions are marginal, our technicians document temperatures and curing conditions; compromised initial curing can invalidate cylinders, so field records are written to show due diligence for any later strength questions.
My general contractor is asking for soil classification data — what tests do you run and what do the results tell us?
Soil classification typically involves grain-size analysis per ASTM D6913 or D422, Atterberg limits testing (ASTM D4318), and assignment of a USCS group symbol per ASTM D2487 or an AASHTO classification. For Tulsa-area clay soils, plasticity index is a key output — it tells the geotechnical engineer and contractor how much the material will swell or shrink with moisture change and whether it is suitable as structural fill without treatment.
How fast can a technician be on site in Tulsa?
Tulsa work is dispatched through our Kansas City, MO regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Tulsa, OK?
Field work in Tulsa is dispatched through the Kansas City, MO regional hub, about 218 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Tulsa projects.
Are the technicians you send to Tulsa certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Oklahoma agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Tulsa · all positions.
Scheduling & proposals
Need construction materials testing in Tulsa?
Call to schedule a technician, or send project documents for a written proposal.