Home / Services / Materials Testing / Racine County, WI
Racine County, Wisconsin
Construction Materials Testing in Racine County, WI
Concrete, soil, and aggregate testing in Racine County, Wisconsin — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Chicago, IL regional hub (59 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Racine County, WI — Milwaukee, Madison, Green Bay
- Coverage
- Wisconsin statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Racine County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Racine County
Racine County sits at the western shore of Lake Michigan, where freeze-thaw cycling is a year-round concern for concrete work and where glacially deposited soils — ranging from dense tills to compressible lacustrine clays near the lakefront — demand rigorous verification before any structure is built on them. Earthwork, utility installation, commercial development, and lakefront infrastructure all carry real risk when subgrade conditions are assumed rather than tested. Our technicians dispatch from our Chicago regional hub to Racine County project sites on a scheduled and project-based basis, delivering ASTM-compliant field and laboratory testing across concrete, aggregate, and soil. Fresh concrete testing, cylinder breaks, Proctor compaction curves, nuclear density, aggregate gradation, soil classification, and corrosivity testing are all performed under a documented quality system and reported in a format your engineer of record, general contractor, or public agency can rely on without qualification.
Glacially derived soils in Racine County frequently include fine-grained lacustrine deposits and variable till sequences that can shift moisture and density characteristics across short distances, making accurate Proctor baselines and systematic field density verification especially important. Wisconsin's climate also means concrete pours in shoulder seasons — spring and late fall — must be managed carefully against low ambient temperatures, and field air content and temperature readings under ASTM C1064 and ASTM C231 are not optional documentation on those days.
FAQ · Racine County
Racine County winters are hard on concrete — what testing is required for cold-weather pours?
During cold-weather placements, ASTM C1064 (temperature) and ASTM C231 or C173 (air content) are essential on every load. ACI 306R sets the industry guidance for cold-weather concrete practices. Our technicians document concrete temperature, ambient temperature, and air content at point of placement so the record shows mix performance matched conditions — a requirement many Racine County project specifications state explicitly.
How does your Chicago hub handle scheduling for Racine County projects with variable pour schedules?
We coordinate coverage on a scheduled and project-based basis dispatched from our Chicago regional hub, approximately 59 miles from Racine County. Project teams should contact us with anticipated pour schedules as early as possible. We cannot guarantee same-day response, so advance scheduling — especially for early-morning pours or multi-pour days — is the most reliable way to ensure a certified technician is on site when concrete arrives.
The soils near Lake Michigan in Racine County seem different from inland sites — does that affect compaction testing?
Yes. Near-lakefront soils can include fine-grained, high-plasticity lacustrine clays whose moisture-density relationship differs significantly from inland glacial till. Each soil type requires its own Proctor curve (ASTM D698 or D1557) — using one curve for a dissimilar soil produces meaningless density results. We run classification testing (ASTM D2487) alongside Proctor work so that field nuclear density readings are compared against the correct baseline.
How fast can a technician be on site in Racine County?
Racine County work is dispatched through our Chicago, IL regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Racine County, WI?
Field work in Racine County is dispatched through the Chicago, IL regional hub, about 59 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Racine County projects.
Are the technicians you send to Racine County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Wisconsin agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Racine County?
Call to schedule a technician, or send project documents for a written proposal.