Home / Services / Materials Testing / Pawtucket, RI
Pawtucket, Rhode Island
Construction Materials Testing in Pawtucket, RI
Concrete, soil, and aggregate testing in Pawtucket, Rhode Island — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Boston, MA regional hub (37 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Pawtucket and the surrounding RI area — Providence, Warwick, Cranston
- Coverage
- Rhode Island statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Pawtucket
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Pawtucket
Pawtucket sits at the northern edge of Narragansett Bay, where a mix of dense urban infill, mill redevelopment, and transit-oriented construction is reshaping an already complex built environment. The region's glacially derived soils — ranging from compact till to variable fill left over from more than a century of industrial use — demand rigorous characterization before foundations go in or subgrade compaction is accepted. Rhode Island's freeze-thaw cycle adds further pressure on concrete durability, making proper air-content verification and cylinder-break programs more than a formality. We dispatch certified field technicians from our Boston regional hub to support contractors, developers, and engineers working in Pawtucket with ASTM-compliant testing of concrete, soil, and aggregate — fresh concrete properties, compressive strength, gradation, Proctor density, soil classification, and corrosivity — backed by a laboratory operating under a documented quality system and reporting prepared for third-party review.
Much of Pawtucket's developable land carries a legacy of industrial fill and variable glacial deposits, so soil classification and compaction verification are critical steps before structural work proceeds. Rhode Island's cold winters also make concrete temperature monitoring and protection planning relevant for a significant portion of the construction calendar.
FAQ · Pawtucket
How do you handle concrete testing during Rhode Island's cold-weather months when ACI 306 requirements apply?
Our technicians measure fresh concrete temperature at point of discharge per ASTM C1064 on every cold-weather visit. When temperatures approach or fall below the thresholds outlined in ACI 306R, that data is recorded in the field report so the contractor and engineer of record can verify protection measures are appropriate. Cylinder sets are documented with ambient and concrete temperatures to support any curing or protection decisions.
Pawtucket has a lot of older industrial sites being redeveloped. What soil testing do you recommend before placing structural fill?
On sites with suspected legacy fill, we recommend at minimum ASTM D2487 visual classification, moisture-density relationship testing per ASTM D1557 or D698, and field compaction verification by nuclear gauge per ASTM D6938. Where corrosive fill is a concern — common near former manufacturing sites — we can add soil corrosivity testing including pH, resistivity, and chloride content to characterize risk to embedded metals or concrete.
What concrete air content threshold should I be targeting for flatwork in Pawtucket given the freeze-thaw exposure?
The appropriate air content depends on the exposure class defined in ACI 318 and the project specification — for severe freeze-thaw exposure with deicing salts, ACI 318 Table 19.3.3 typically requires 6 percent air content for 3/4-inch nominal maximum aggregate. Our technicians measure air content per ASTM C231 and record results against your specification's required range, flagging nonconforming loads before placement continues.
How fast can a technician be on site in Pawtucket?
Pawtucket work is dispatched through our Boston, MA regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Pawtucket, RI?
Field work in Pawtucket is dispatched through the Boston, MA regional hub, about 37 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Pawtucket projects.
Are the technicians you send to Pawtucket certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Rhode Island agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring: we staff this work locally. Field technician openings in Pawtucket · all positions.
Scheduling & proposals
Need construction materials testing in Pawtucket?
Call to schedule a technician, or send project documents for a written proposal.