Home / Services / Materials Testing / Montgomery County, AL
Montgomery County, Alabama
Construction Materials Testing in Montgomery County, AL
Concrete, soil, and aggregate testing in Montgomery County, Alabama — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Atlanta, GA regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Montgomery County, AL — Birmingham, Huntsville, Montgomery
- Coverage
- Alabama statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Montgomery County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Montgomery County
Montgomery County sits in Alabama's Coastal Plain transition zone, where silty and clayey soils derived from weathered sedimentary formations are common beneath development sites. These soils can be sensitive to moisture changes, making proper compaction verification and soil classification critical before any slab, pavement, or structural fill goes in. Alabama's hot, humid summers also compress concrete finishing windows and require closer attention to water-cement ratio and slump at the point of placement. For developers, contractors, and engineers working on residential subdivisions, commercial construction, roadway improvements, and public infrastructure across the Montgomery metro, our firm provides ASTM-compliant field and laboratory testing of concrete, aggregate, and soil — from fresh concrete testing and cylinder breaks to Proctor compaction, nuclear density, and soil corrosivity analysis. Technicians dispatched from our Atlanta regional hub serve Montgomery County projects under a documented quality system, delivering defensible data and clear reporting prepared for third-party review.
Soils in the Montgomery area frequently include high-plasticity clays that respond significantly to seasonal moisture variation, making Proctor moisture-density relationships (ASTM D698 / D1557) and in-place density verification especially important for subgrade and fill work. Alabama's extended warm season can push concrete placement temperatures well above thresholds that affect set time and strength gain, reinforcing the value of consistent fresh concrete monitoring at the point of delivery.
FAQ · Montgomery County
Montgomery County has a lot of high-plasticity clay on our site. What soil classification and compaction testing do you run to characterize it?
For sites with expansive or high-plasticity clay, we perform Atterberg Limits testing (ASTM D4318) and grain-size analysis (ASTM D6913 / D7928) to classify the soil under ASTM D2487. Compaction characteristics are established with Standard or Modified Proctor testing (ASTM D698 or D1557), and field density is verified by nuclear gauge (ASTM D6938) or sand cone (ASTM D1556). These results together define acceptable fill placement and moisture targets.
How do you handle concrete cylinder breaks for a project in Montgomery County — where are cylinders cured and broken?
Field technicians cast and initially cure cylinders on site per ASTM C31, maintaining them in insulated containers to protect against Alabama's temperature extremes during the first 24 hours. Cylinders are then transported to our laboratory for standard curing and compression testing under ASTM C39. Break results at 7-day and 28-day intervals are reported against your specified design strength, with documentation suitable for engineer and owner review.
Summer heat in Montgomery can be brutal. What fresh concrete tests are most important when ambient temperatures are high?
In hot-weather conditions, we prioritize concrete temperature (ASTM C1064), slump or slump flow (ASTM C143), and air content (ASTM C231) at the point of delivery before placement begins. Elevated concrete temperature accelerates hydration, shortens the finishing window, and can reduce 28-day strength if water is added at the truck. These field measurements create a contemporaneous record that protects all parties if strength questions arise later.
How fast can a technician be on site in Montgomery County?
Montgomery County work is dispatched through our Atlanta, GA regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Montgomery County, AL?
Field work in Montgomery County is dispatched through the Atlanta, GA regional hub, about 146 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Montgomery County projects.
Are the technicians you send to Montgomery County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Alabama agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Montgomery County?
Call to schedule a technician, or send project documents for a written proposal.