Home / Services / Materials Testing / Macomb County, MI
Macomb County, Michigan
Construction Materials Testing in Macomb County, MI
Concrete, soil, and aggregate testing in Macomb County, Michigan — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Detroit, MI regional hub (24 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Macomb County, MI — Detroit, Grand Rapids, Warren
- Coverage
- Michigan statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Macomb County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Macomb County
Macomb County sits at the northern edge of Metro Detroit's sustained construction activity — residential subdivisions pushing into Shelby and Macomb townships, commercial corridors along M-59 and Hall Road, and ongoing public infrastructure work across the county's road and utility networks. Michigan's freeze-thaw cycle puts real demands on concrete mix design, placement timing, and curing practice, while the glacial till and variable subsurface conditions common to southeast Michigan make defensible compaction and soil classification data essential for foundations, pavements, and engineered fills. Our firm dispatches certified field technicians from our Detroit regional hub to serve Macomb County projects on a scheduled and project-based basis. In the field and in the laboratory — which operates under a documented quality system — we perform ASTM-compliant testing of concrete, aggregate, and soil, and return clear, defensible reports your project team can act on and your inspector of record can rely on.
Southeast Michigan's glacial geology produces variable subsurface profiles — layers of clay, silt, sand, and till can appear within short horizontal distances on the same site, making soil classification and compaction verification especially important for foundations and engineered fills. Michigan's extended cold season also requires close attention to concrete placement temperatures and cold-weather protection per ACI 306 to achieve specified strength development.
FAQ · Macomb County
Michigan winters can push concrete placements late into the schedule — can you support cold-weather pours in Macomb County and document what's needed?
Yes. Our technicians perform fresh concrete testing per ASTM C172 and measure concrete temperature per ASTM C1064 at the point of discharge. When ambient conditions trigger cold-weather requirements under ACI 306, those temperature readings become part of the field record. Cylinder sets are handled and protected per ASTM C31 to preserve validity of the break results, giving your team and the inspector of record documentation that holds up.
We're grading a residential development in Shelby Township on what looks like mixed glacial soils — what compaction testing program makes sense?
For variable glacial soils — combinations of clay, silt, and sandy till are common in southeast Michigan — we establish a moisture-density relationship using ASTM D698 or D1557 Proctor testing early in the program. Field density is then verified by nuclear gauge per ASTM D6938 or sand-cone per ASTM D1556. Testing frequency is set to match lift sequences and the variability the soil profile presents, so problem areas are caught before they're buried.
What soil classification methods do you use, and how does that information affect our foundation design?
We classify soils using ASTM D2487 (USCS) or ASTM D3282 (AASHTO), based on laboratory grain-size analysis per ASTM C136 and Atterberg limits per ASTM D4318. Classification data defines bearing assumptions, shrink-swell potential, and drainage behavior — information your geotechnical engineer needs to size footings, select subbase materials, and specify compaction targets. Getting classification right early prevents costly redesign or remediation later.
How fast can a technician be on site in Macomb County?
Macomb County work is dispatched through our Detroit, MI regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Macomb County, MI?
Field work in Macomb County is dispatched through the Detroit, MI regional hub, about 24 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Macomb County projects.
Are the technicians you send to Macomb County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Michigan agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Macomb County?
Call to schedule a technician, or send project documents for a written proposal.