Home / Services / Materials Testing / Guilford County, NC
Guilford County, North Carolina
Construction Materials Testing in Guilford County, NC
Concrete, soil, and aggregate testing in Guilford County, North Carolina — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Raleigh, NC regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Guilford County, NC — Charlotte, Raleigh, Greensboro
- Coverage
- North Carolina statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Guilford County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Guilford County
Guilford County is one of North Carolina's most active construction markets, anchored by Greensboro and High Point and driven by sustained commercial, industrial, and mixed-use development. The Piedmont's residual soils — weathered from underlying metamorphic and granitic rock — vary in bearing capacity and moisture sensitivity across short distances, making field verification of compaction and subgrade conditions essential rather than optional. Seasonal temperature swings also influence concrete work: summer heat accelerates set times and raises the risk of plastic shrinkage cracking, while winter cold demands attention to protection and curing. Our firm dispatches certified field technicians to Guilford County project sites through our Raleigh regional hub, covering fresh concrete testing and cylinder breaks, aggregate gradation and quality, Proctor and nuclear density, soil classification, and soil corrosivity testing. All work follows applicable ASTM standards and is documented under a formal quality system, so every report your engineer or inspector of record receives is traceable, defensible, and formatted for direct use in project closeout.
Piedmont soils in the Guilford County area commonly include residual silts and clayey soils derived from weathered metamorphic rock, which can exhibit variable plasticity and respond unpredictably to moisture changes — conditions that underscore the importance of ASTM D698/D1557 Proctor testing and in-place density verification throughout earthwork operations. North Carolina's humid climate, including periods of heavy seasonal rainfall, can also complicate compaction scheduling and affect moisture-density relationships between testing intervals.
FAQ · Guilford County
Our project sits on fill over Piedmont residual soil. What testing program is appropriate for earthwork acceptance?
For projects on Piedmont residual or fill soils, the typical program begins with ASTM D698 or D1557 laboratory Proctor testing to establish the moisture-density relationship, followed by in-place density testing per ASTM D6938 using nuclear methods or ASTM D1556 sand-cone. Soil classification under ASTM D2487 is also recommended so the geotechnical engineer can confirm fill suitability before placement and compaction acceptance testing begins.
How do high summer temperatures in Greensboro affect concrete testing requirements on our slab pours?
When ambient and concrete temperatures climb — common during Guilford County summers — fresh concrete can lose slump rapidly and begin setting faster than placement crews expect. Technicians measure concrete temperature per ASTM C1064 alongside slump (ASTM C143) and air content (ASTM C231) on every load. If temperature exceeds limits set in ACI 305R or project specs, the technician documents noncompliance so the contractor and engineer can act before the load is placed.
The City of Greensboro or Guilford County inspectors will be on site. Do your reports satisfy what local plan review expects for materials documentation?
Our reports reference the governing ASTM method, the specification requirement, the measured result, and pass/fail status in a clear, structured format that aligns with what building departments and inspectors of record typically require for closeout documentation. When the project involves IBC Chapter 17 special inspection, test reports are formatted to support the statement of special inspections. Confirm specific local submission format requirements with your permit office early in the project.
How fast can a technician be on site in Guilford County?
Guilford County work is dispatched through our Raleigh, NC regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Guilford County, NC?
Field work in Guilford County is dispatched through the Raleigh, NC regional hub, about 67 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Guilford County projects.
Are the technicians you send to Guilford County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where North Carolina agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Guilford County?
Call to schedule a technician, or send project documents for a written proposal.