Home / Services / Materials Testing / Grand Forks, ND
Grand Forks, North Dakota
Construction Materials Testing in Grand Forks, ND
Concrete, soil, and aggregate testing in Grand Forks, North Dakota — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Minneapolis, MN regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Grand Forks and the surrounding ND area — Fargo, Bismarck, Minot
- Coverage
- North Dakota statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Grand Forks
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Grand Forks
Grand Forks sits on the Red River Valley's exceptionally flat, clay-heavy floodplain — soils that expand, compress, and drain poorly, and that demand careful characterization before a foundation or pavement section goes in. Add a climate that swings from freeze-thaw cycles deep into spring to summer heat that accelerates concrete set times, and the margin for untested assumptions narrows considerably. Contractors, developers, and engineers working in Grand Forks need testing that keeps pace with construction schedules while producing documentation prepared for third-party review, agency scrutiny, and project specifications. We dispatch certified field technicians from our Minneapolis regional hub to perform ASTM-compliant field and laboratory testing across concrete, aggregate, and soil — fresh concrete sampling, cylinder breaks, Proctor compaction, nuclear density, gradation, soil classification, and corrosivity. Every engagement runs under a documented quality system built to produce defensible, traceable results from first site visit through final report.
The Red River Valley's lacustrine clay soils commonly exhibit low bearing capacity and moisture sensitivity, making Proctor moisture-density relationships and in-place compaction verification critical on nearly every earthwork project in the region. Concrete placements during the extended North Dakota freeze-thaw season require close attention to fresh concrete temperature, air content, and protection planning consistent with ACI 306 cold-weather concreting guidance.
FAQ · Grand Forks
Our spec requires concrete air content testing during cold-weather pours in Grand Forks — what does that involve in the field?
A certified ACI Field Testing Technician measures air content per ASTM C231 (pressure method) or ASTM C173 (volumetric method, used when lightweight aggregate is present) at the point of discharge. Fresh concrete temperature is recorded per ASTM C1064. When ambient or concrete temperatures approach thresholds defined in ACI 306R, those readings become part of the placement record and support decisions about protection measures.
How far in advance do we need to schedule a technician for a Grand Forks project?
Coverage is dispatched through our Minneapolis regional hub, approximately 271 miles from Grand Forks, so advance scheduling is important. For routine concrete or compaction testing visits, we ask for at least 48 to 72 hours notice whenever possible. Project-based coverage with recurring site visits can be set up on a prescheduled basis to reduce coordination effort throughout the job.
North Dakota DOT projects often require specific compaction acceptance criteria — can your testing support state and local agency submittals?
Yes. We perform standard and modified Proctor testing per ASTM D698 and ASTM D1557 to establish moisture-density relationships, and in-place density by nuclear gauge per ASTM D6938. Reports document test location, lift number, percent compaction relative to the applicable Proctor curve, and moisture content — the data elements typically required for NDDOT and local agency earthwork acceptance submittals.
How fast can a technician be on site in Grand Forks?
Grand Forks work is dispatched through our Minneapolis, MN regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Grand Forks, ND?
Field work in Grand Forks is dispatched through the Minneapolis, MN regional hub, about 271 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Grand Forks projects.
Are the technicians you send to Grand Forks certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where North Dakota agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Grand Forks · all positions.
Scheduling & proposals
Need construction materials testing in Grand Forks?
Call to schedule a technician, or send project documents for a written proposal.