Home / Services / Materials Testing / Evansville, IN
Evansville, Indiana
Construction Materials Testing in Evansville, IN
Concrete, soil, and aggregate testing in Evansville, Indiana — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Nashville, TN regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Evansville and the surrounding IN area — Indianapolis, Fort Wayne, Carmel
- Coverage
- Indiana statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Evansville
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Evansville
Evansville sits at the southwestern tip of Indiana where the Ohio River corridor has driven steady industrial, commercial, and infrastructure construction for generations. That activity brings real materials-testing demands: variable alluvial and glacial soils that can challenge compaction and bearing assumptions, concrete placements that must account for wide seasonal temperature swings, and projects subject to Indiana DOT specifications, local municipality requirements, and IBC Chapter 17 special inspection programs. Our firm dispatches certified field technicians to Evansville project sites through our Nashville regional hub, covering scheduled and project-based assignments for contractors, developers, and engineers. In the field and in the laboratory, every test — fresh concrete properties, cylinder breaks, aggregate gradation, Proctor compaction, nuclear density, soil classification, and corrosivity — is performed to the applicable ASTM standard under a documented quality system, with reports structured to satisfy inspection programs, owner requirements, and design engineers.
Southwestern Indiana soils commonly include silty and clayey profiles of alluvial and glaciated origin, which can exhibit moisture sensitivity and variable density response — conditions that make Proctor baseline testing and lift-by-lift nuclear density verification particularly important on earthwork and pavement subgrade operations. Evansville's climate spans hot summers and cold winters, meaning concrete placements in shoulder seasons carry real risk of temperature-related strength loss; field monitoring of concrete temperature and air content per ASTM C1064 and ASTM C231 at the point of placement is a practical necessity, not a formality.
FAQ · Evansville
What soil classification testing do you perform for Evansville projects, and why does it matter here?
We perform grain-size analysis per ASTM D6913 and Atterberg limits per ASTM D4318, which together support USCS classification under ASTM D2487. In southwestern Indiana, where silty and clayey soils of alluvial origin are common, classification data directly informs earthwork decisions — compaction specifications, moisture conditioning requirements, and whether subgrade improvement is warranted before paving or structure foundations.
Can you support Indiana DOT specification requirements for compaction and aggregate testing on local road and site work?
Yes. Technicians perform standard and modified Proctor tests per ASTM D698 and ASTM D1557 to establish compaction baselines, and nuclear gauge density testing per ASTM D6938 for field verification. Aggregate gradation and quality testing follows applicable ASTM methods. Reports reference the test method and specification limit, giving project engineers and inspectors documentation formatted to satisfy INDOT and local agency submittals.
How do cold-weather concrete conditions in Evansville affect what your technicians check during a placement?
When ambient or concrete temperatures approach thresholds defined in ACI 306, technicians record concrete temperature per ASTM C1064 alongside slump, air content, and unit weight at the point of discharge. Low concrete temperature slows strength gain, so these records — tied to cylinder break data per ASTM C39 — give the project team documented evidence that placements met temperature limits and that break schedules account for potential delays in strength development.
How fast can a technician be on site in Evansville?
Evansville work is dispatched through our Nashville, TN regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Evansville, IN?
Field work in Evansville is dispatched through the Nashville, TN regional hub, about 132 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Evansville projects.
Are the technicians you send to Evansville certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Indiana agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Evansville · all positions.
Scheduling & proposals
Need construction materials testing in Evansville?
Call to schedule a technician, or send project documents for a written proposal.