Home / Services / Materials Testing / Edison, NJ
Edison, New Jersey
Construction Materials Testing in Edison, NJ
Concrete, soil, and aggregate testing in Edison, New Jersey — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- New York, NY regional hub (25 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Edison and the surrounding NJ area — Newark, Jersey City, Paterson
- Coverage
- New Jersey statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Edison
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Edison
Edison, New Jersey sits at the center of one of the most active development corridors in the Northeast, where dense redevelopment of former industrial parcels, institutional expansion, and infrastructure rehabilitation projects move simultaneously under scrutiny from municipal inspectors and state agencies. Middlesex County's variable subsurface conditions — ranging from fill of uncertain character on brownfield sites to native soils with significantly different bearing characteristics — make defensible materials testing a practical necessity, not a procedural formality. Concrete placed during New Jersey's cold-season months requires documentation that mix temperatures, air content, and slump conform to specification before the pour proceeds, and cylinder break data must be traceable when questions arise later. Our certified technicians dispatch to Edison project sites through our New York regional hub, performing ASTM-compliant field and laboratory testing of concrete, soil, and aggregate under a documented quality system. Reports are structured to support contractor submittals, engineer review, and agency close-out.
Middlesex County development frequently encounters fill soils and variable natural strata that require careful classification and compaction verification; New Jersey's four-season climate also means concrete testing programs must account for cold-weather and hot-weather placing conditions across much of the construction calendar.
FAQ · Edison
Edison has a lot of brownfield and former industrial redevelopment — what soil testing do you perform on sites with unknown fill?
On sites with uncertain fill histories, we perform ASTM D2487 visual-manual soil classification and ASTM D698 or D1557 Proctor compaction testing to establish density baselines. Nuclear gauge field density testing per ASTM D6938 then documents compaction of placed layers. If corrosion potential of fill materials is a concern for buried utilities or structures, soil corrosivity testing for pH, resistivity, sulfates, and chlorides is also available.
New Jersey winters can be severe — how does cold-weather concrete affect the testing program on my Edison project?
ACI 306R sets the framework for cold-weather concreting, and your specification may invoke temperature limits on fresh concrete delivery. Our technicians measure concrete temperature per ASTM C1064 at point of discharge, alongside slump (ASTM C143), air content (ASTM C231), and unit weight (ASTM C138). Cylinders are protected and initially cured in the field per ASTM C31 requirements, which is critical documentation when temperatures approach or fall below 50°F.
Middlesex County and New Jersey DOT projects often reference specific compaction specs — can you test to those requirements?
Yes. We establish the laboratory maximum dry density and optimum moisture content using ASTM D698 (Standard Proctor) or ASTM D1557 (Modified Proctor) to match the compaction specification your project references. Field density is then measured using ASTM D6938. The proctor method specified — whether by the county, NJDOT, or a private engineer of record — determines which standard we run; we document the reference in the report.
How fast can a technician be on site in Edison?
Edison work is dispatched through our New York, NY regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Edison, NJ?
Field work in Edison is dispatched through the New York, NY regional hub, about 25 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Edison projects.
Are the technicians you send to Edison certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where New Jersey agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring: we staff this work locally. Field technician openings in Edison · all positions.
Scheduling & proposals
Need construction materials testing in Edison?
Call to schedule a technician, or send project documents for a written proposal.