Home / Services / Materials Testing / Derry, NH
Derry, New Hampshire
Construction Materials Testing in Derry, NH
Concrete, soil, and aggregate testing in Derry, New Hampshire — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Boston, MA regional hub (38 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Derry and the surrounding NH area — Manchester, Nashua, Concord
- Coverage
- New Hampshire statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Derry
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Derry
Derry sits in southern New Hampshire, where construction activity spans residential subdivisions, commercial pads, and infrastructure improvements serving one of the state's faster-growing communities. Building here means working with glacially derived soils — a mix of till, stratified drift, and occasional ledge — that can vary sharply across a single site, making compaction verification and soil classification essential rather than optional. Concrete work adds another layer of complexity: New Hampshire's freeze-thaw cycle is real, and placements from late fall through early spring carry meaningful durability risk if air content, slump, and temperature aren't documented at the point of placement. Our certified technicians dispatch to Derry through our Boston regional hub, providing scheduled and project-based field testing of concrete, soil, and aggregate. The laboratory operates under a documented quality system, and every report is prepared for third-party review.
Southern New Hampshire's glacial geology frequently produces variable subsurface conditions — dense till, granular outwash, and isolated boulders can all appear within a short distance — making Proctor correlation and in-place density verification critical at each lift. The region's climate delivers enough freeze-thaw cycles annually that fresh concrete air entrainment testing per ASTM C231 is a practical necessity on exposed flatwork and structural pours from roughly October through April.
FAQ · Derry
How do you handle scheduling for Derry projects given the dispatch distance from your hub?
Derry coverage is coordinated through our Boston regional hub, approximately 38 miles away. We schedule field visits on a project-based or standing-schedule basis tied to your pour calendar or earthwork sequence. Providing advance notice of planned placements or compaction lifts allows us to confirm technician availability and avoid gaps in testing coverage that could create specification compliance issues.
What soil classification work do you perform, and why does it matter on a Derry site?
We perform grain-size analysis per ASTM D6913, Atterberg limits per ASTM D4318, and USCS classification per ASTM D2487. On Derry sites with glacial till or mixed stratified drift, classification helps engineers confirm whether native material is suitable for structural fill or requires amendment or replacement — a decision that affects subgrade preparation, compaction specs, and long-term settlement risk.
Which Proctor method applies to my project, and can you perform both?
We perform both Standard Proctor (ASTM D698) and Modified Proctor (ASTM D1557). The applicable method is typically set by the project specification or geotechnical report. Modified Proctor is common under structural slabs, pavements, and building pads where higher compactive effort is specified. We confirm the required method with the engineer of record before establishing the moisture-density curve used for field density acceptance.
How fast can a technician be on site in Derry?
Derry work is dispatched through our Boston, MA regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Derry, NH?
Field work in Derry is dispatched through the Boston, MA regional hub, about 38 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Derry projects.
Are the technicians you send to Derry certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where New Hampshire agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring: we staff this work locally. Field technician openings in Derry · all positions.
Scheduling & proposals
Need construction materials testing in Derry?
Call to schedule a technician, or send project documents for a written proposal.