Home / Services / Materials Testing / Bexar County, TX
Bexar County, Texas
Construction Materials Testing in Bexar County, TX
Concrete, soil, and aggregate testing in Bexar County, Texas — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Austin, TX regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Bexar County, TX — Houston, Sugar Land, Katy
- Coverage
- Texas statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Bexar County
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Bexar County
Bexar County's construction market is broad and active — from large commercial and institutional projects along major corridors to residential subdivisions expanding into the surrounding Hill Country fringe. The region's expansive clays and variable limestone-over-soil profiles create real risk for foundations, pavements, and earthwork if subgrade conditions are not verified at each phase of construction. High summer temperatures also compress the working window for fresh concrete placement, making field testing for slump, air content, and temperature a practical necessity, not a formality. Our firm dispatches certified field technicians into Bexar County through our Austin regional hub to perform ASTM-compliant concrete, aggregate, and soil testing on scheduled and project-based assignments. Laboratory analysis — gradations, Proctor curves, soil classification, and corrosivity — is processed under a documented quality system and returned with defensible, report-ready data your project record and inspecting authority can rely on.
Much of Bexar County is underlain by expansive clay soils — including series common to the Texas Blackland Prairie and transitional zones toward the Edwards Plateau — that respond significantly to moisture change; Proctor compaction testing (ASTM D698 / D1557) and in-place density verification are critical controls throughout earthwork and subgrade preparation. Hot, dry summers can accelerate concrete set times, making timely field testing for temperature and slump per ASTM C1064 and C143 an important quality-control step on any structural pour.
FAQ · Bexar County
Bexar County has a lot of expansive clay — what soil testing do you run to characterize subgrade before we build?
For expansive clay sites we typically run ASTM D2487 classification, Atterberg limits (ASTM D4318), and moisture-density relationships via ASTM D698 or D1557. These results define the plasticity index and compaction targets your geotechnical engineer needs to specify subgrade treatment — lime stabilization depths, for example — before structural fill or slab work begins.
How does summer heat in San Antonio affect concrete testing procedures on our job?
When ambient and concrete temperatures are elevated, ACI 305R hot-weather guidelines apply. Our technicians measure fresh concrete temperature per ASTM C1064 at point of delivery, and if readings approach or exceed specification limits, that is documented immediately. Slump (ASTM C143) and air content (ASTM C231) testing follows; timing from batching to testing is tracked because elevated temperatures reduce the window before stiffening affects results.
We're paving a private drive and parking lot in Bexar County — do we need compaction testing on the base course?
Most commercial site specifications and local jurisdiction review require in-place density testing on base course and subbase lifts. We perform nuclear gauge density testing (ASTM D6938) referenced against a lab-established Proctor curve (ASTM D698 or D1557). Passing density on each lift — before the next lift is placed — is the standard of practice and provides documentation if pavement performance is later questioned.
How fast can a technician be on site in Bexar County?
Bexar County work is dispatched through our Austin, TX regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Bexar County, TX?
Field work in Bexar County is dispatched through the Austin, TX regional hub, about 74 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Bexar County projects.
Are the technicians you send to Bexar County certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where Texas agencies or owners require state-specific certifications, those are confirmed in the proposal.
Scheduling & proposals
Need construction materials testing in Bexar County?
Call to schedule a technician, or send project documents for a written proposal.