Home / Services / Materials Testing / Albuquerque, NM
Albuquerque, New Mexico
Construction Materials Testing in Albuquerque, NM
Concrete, soil, and aggregate testing in Albuquerque, New Mexico — fresh concrete tests and cylinder breaks, Proctor and nuclear density, gradation, Atterberg limits, and soil corrosivity — by ACI- and NICET-certified technicians, with results reviewed and issued under a documented quality system.
- Dispatched from
- Phoenix, AZ regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Albuquerque and the surrounding NM area — Las Cruces, Rio Rancho, Santa Fe
- Coverage
- New Mexico statewide · 27 regional hubs
- Technicians
- ACI Grade I · NICET CMT · ICC special inspectors
- Call us
- (346) 420-5425
Scope
What we test in Albuquerque
Concrete testing services
Fresh concrete sampled and tested at the pour — slump, air content, unit weight, and temperature — with cylinders and beams cast on site and broken in the laboratory on the schedule your specification calls for.
ASTM C172ASTM C143ASTM C231ASTM C173ASTM C138ASTM C1064ASTM C31ASTM C39
Aggregate testing services
Gradation, fines content, specific gravity and absorption, unit weight, abrasion resistance, and stockpile moisture for concrete, base course, and backfill aggregates.
ASTM D75ASTM C136ASTM C117ASTM C127ASTM C128ASTM C29ASTM C131ASTM C566
Soil compaction and density testing
Standard and modified Proctor curves in the laboratory and in-place density by nuclear gauge on every lift, so fill, subgrade, and trench backfill are documented against the specified percent compaction.
Soil classification and index testing
Sieve and hydrometer gradation, Atterberg limits, moisture content, specific gravity, and USCS classification for earthwork acceptance, select-fill verification, and geotechnical reports.
ASTM D6913ASTM D7928ASTM D1140ASTM D4318ASTM D2216ASTM D854ASTM D2487
Soil corrosivity testing
pH and electrical resistivity of backfill for MSE walls, pipelines, and buried structures, reported against the specification limits for metallic and geosynthetic reinforcement.
Special inspection (IBC Chapter 17)
ICC-certified special inspectors for reinforced concrete and soils, reporting to the building official alongside the materials test results, so one agency covers both requirements.
Full scope, standards list, and pricing basis: Construction Materials Testing.
Local conditions
Construction materials testing conditions in Albuquerque
Albuquerque sits in the Middle Rio Grande Valley at roughly 5,300 feet elevation, where expansive and compressible soils, high desert aridity, and temperature swings of 40°F or more within a single day all bear directly on how concrete cures, how fills consolidate, and how long a structure performs. Aggregate sourced from regional quarries and arroyos varies enough in gradation and durability that specification compliance cannot be assumed. Construction activity spanning municipal infrastructure, commercial development, and transportation corridors across Bernalillo County and the surrounding metro makes third-party materials testing a routine contract requirement — not an afterthought. Our firm dispatches ACI- and NICET-certified field technicians through our Phoenix regional hub to deliver ASTM-compliant testing of concrete, soil, and aggregate on a scheduled or project-based basis. Every test is conducted under a documented quality system and reported in a format prepared for third-party review.
New Mexico's high desert soils frequently include silty and clayey materials with variable plasticity that respond strongly to moisture change — conditions that make Proctor moisture-density relationships and in-place compaction verification critical on any earthwork scope. The region's low relative humidity and intense solar exposure can accelerate surface drying during concrete placement, making fresh concrete air content and slump testing under ASTM C143 and C231 time-sensitive from the moment the truck arrives.
FAQ · Albuquerque
Albuquerque sees big daily temperature swings. How does that affect when you sample fresh concrete, and what are you measuring?
Diurnal swings mean concrete temperature at point of discharge can shift significantly between a morning and afternoon pour. Our technicians record concrete temperature per ASTM C1064 at every sampling, alongside slump (ASTM C143), air content (ASTM C231), and unit weight (ASTM C138). These values collectively determine whether the mix is placed within the temperature and workability limits your specification sets and ACI 305 or 306 guidelines require.
We're grading a site near the Rio Grande corridor where soils look variable. What classification and compaction testing applies?
We perform visual and index-based soil classification following ASTM D2487 (Unified Soil Classification System), which identifies whether material is granular, silty, or clayey and guides compaction specification selection. Moisture-density relationships are established by Standard or Modified Proctor per ASTM D698 or D1557. In-place density is then verified by nuclear gauge per ASTM D6938 or by sand-cone per ASTM D1556, depending on material type and spec requirement.
City of Albuquerque or NMDOT projects often reference specific compaction percentages. Can your reporting support those agency requirements?
Yes. Our reports document the laboratory maximum dry density and optimum moisture content from the Proctor test, then present field density results as a percentage of that maximum — the format agencies use to confirm specification compliance. Reports identify the applicable ASTM test method, technician certification, and project information so the data is directly usable in agency submittals and project files without additional interpretation.
How fast can a technician be on site in Albuquerque?
Albuquerque work is dispatched through our Phoenix, AZ regional hub. Scheduled visits are set up by phone at (346) 420-5425; multi-day placements and full-time project assignments are scheduled through a proposal request.
Which office covers materials testing in Albuquerque, NM?
Field work in Albuquerque is dispatched through the Phoenix, AZ regional hub, about 330 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Albuquerque projects.
Are the technicians you send to Albuquerque certified?
Yes. Concrete technicians hold ACI Concrete Field Testing Technician Grade I; soils and laboratory technicians hold NICET Construction Materials Testing certifications; special inspection is performed by ICC-certified special inspectors. Where New Mexico agencies or owners require state-specific certifications, those are confirmed in the proposal.
Hiring for project coverage. Field technician openings in Albuquerque · all positions.
Scheduling & proposals
Need construction materials testing in Albuquerque?
Call to schedule a technician, or send project documents for a written proposal.