Home / Services / Environmental / Biloxi, MS
Biloxi, Mississippi
Environmental Services in Biloxi, MS
Environmental site assessments and construction-phase environmental support that keep transactions and projects moving without surprises. Biloxi and the surrounding MS area is covered on a project basis through our Atlanta, GA regional hub.
- Dispatched from
- Atlanta, GA regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Biloxi and the surrounding MS area — Jackson, Gulfport, Southaven
- Coverage
- Mississippi statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Mississippi
- Call us
- (346) 420-5425
Scope
Environmental services in Biloxi
- Phase I Environmental Site Assessments for acquisitions and refinancing
- Phase II subsurface sampling when a Phase I identifies recognized environmental conditions
- Construction stormwater support: SWPPP compliance inspections
- Soil management screening for export and import of fill material
Full scope, standards list, and pricing basis: Environmental Services.
Local conditions
Environmental conditions in Biloxi
Biloxi sits at the intersection of Gulf Coast storm exposure, a high water table, and a development landscape shaped by hospitality, port operations, and post-Katrina reconstruction — conditions that put environmental due diligence at the front of nearly every transaction and ground-disturbing project. Coastal Mississippi soils frequently carry legacy contamination from fuel storage, industrial activity, and flood-driven sediment redistribution, and lenders, title companies, and state regulators routinely require documented environmental review before a deal can close or a shovel can turn. Our firm provides Phase I and Phase II Environmental Site Assessments, as well as construction-phase environmental support, dispatched through our Atlanta regional hub on a scheduled and project-based basis. Reports are produced under a documented quality system and prepared to satisfy lender, agency, and due-diligence requirements so your project timeline stays intact.
Gulf Coast sites in the Biloxi area commonly present shallow water tables and soils with variable permeability, conditions that affect how subsurface investigation sampling points are advanced and how quickly contaminants can migrate. Warm, humid conditions year-round extend the window for fieldwork but also accelerate biological and chemical activity in affected soils, a factor that informs sampling strategy and laboratory hold times.
FAQ · Biloxi
What Mississippi state agency does our Phase II report need to satisfy, and does your report format align with their requirements?
The Mississippi Department of Environmental Quality (MDEQ) oversees voluntary cleanup and brownfield programs in the state. Phase II scope and reporting are structured to address MDEQ guidance alongside ASTM E1903 requirements, documenting sampling rationale, analytical results, and data quality objectives in a format suitable for regulatory submission or lender review. Specific submittal requirements should be confirmed with MDEQ for your site's program pathway.
How does the high water table common along the Biloxi coast affect subsurface investigation, and can you still collect soil borings?
Shallow groundwater — common in low-lying coastal Mississippi — limits the depth achievable with hand-auger methods and can require hollow-stem auger or direct-push rigs to collect samples below the capillary fringe. Soil sampling follows ASTM D1452 or D6282 as applicable. Groundwater sampling, where warranted, follows EPA low-flow protocols. Equipment and method selection are confirmed during scope development based on site-specific conditions.
Our Biloxi site was affected by hurricane flooding in the past. Does that change the Phase I scope?
Storm surge and flooding can redistribute contaminants from off-site sources onto a property and may leave sediment deposits with their own constituent profile. A Phase I ESA conducted under ASTM E1527-21 requires review of historical records and site reconnaissance that would capture evidence of such events. If reconnaissance or records indicate flood-driven impacts, the environmental professional may identify a Recognized Environmental Condition warranting Phase II follow-up.
Which office covers environmental in Biloxi, MS?
Field work in Biloxi is dispatched through the Atlanta, GA regional hub, about 351 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Biloxi projects.
Are the technicians you send to Biloxi certified?
Field sampling and testing in Biloxi are performed by our ACI- and NICET-certified technicians. Environmental engineering and professional services are delivered with professionals licensed in Mississippi, coordinated under one proposal.
Hiring for project coverage. Field technician openings in Biloxi · all positions.
Scheduling & proposals
Need environmental services in Biloxi?
Call to schedule a technician, or send project documents for a written proposal.