Home / Services / Survey / Utah County, UT
Utah County, Utah
Land Surveying in Utah County, UT
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Utah County is covered on a project basis through our Salt Lake City, UT regional hub.
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Utah County, UT — Salt Lake City, West Valley City, Provo
- Coverage
- Utah statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Utah
- Call us
- (346) 420-5425
Scope
Survey services in Utah County
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Utah County
Utah County is one of the fastest-growing counties in the United States, with residential subdivisions, mixed-use corridors, and infrastructure projects pushing steadily up alluvial fans and into terrain shaped by the Wasatch Front and Utah Lake's historic shoreline. That topographic and geologic variety — sloping benchland grades, fill areas near the lake plain, and canyon-mouth fan deposits — makes precise field control a practical necessity, not a formality. Errors in boundary location or staking translate directly into encroachments, re-grading costs, and permit delays with municipal and county review offices that are processing high volumes of submittals. Our field crews, dispatched through our Salt Lake City regional hub, provide boundary, topographic, and construction staking surveys coordinated with your design schedule. Work is performed under a documented quality system, and deliverables are prepared to support grading plans, plat submittals, and site-development approvals through Utah County and individual municipal jurisdictions.
Utah County's building terrain ranges from relatively flat lake-plain areas to steeper benchland and canyon-mouth alluvial fans, where elevation changes and variable surface soils can affect both survey datum selection and the precision needed for construction staking. Winter conditions along the Wasatch Front — frozen ground, snow cover, and reduced sight lines — can limit field access at higher elevations and should factor into survey scheduling for projects breaking ground in early spring.
FAQ · Utah County
How does the alluvial fan terrain near the Wasatch Front affect the accuracy of a topographic survey?
Alluvial fan surfaces can carry abrupt grade changes and irregular microtopography that compress contour intervals significantly over short horizontal distances. Field crews must increase shot density in these zones to capture true ground character. Deliverables should clearly state the vertical datum, control network used, and contour interval so your civil engineer can assess whether the resolution suits grading and drainage design at the site-specific slope.
Will Utah County or the individual city require a licensed Utah land surveyor of record on the plat submittal?
Yes. Utah Code requires that plats, record of survey maps, and certain boundary determinations bear the seal and signature of a Professional Land Surveyor (PLS) licensed in the state of Utah. Municipal and county subdivision ordinances in Utah County uniformly enforce this requirement. Confirm the specific submittal checklist with the applicable city — Provo, Orem, Lehi, and other municipalities each maintain their own development review processes.
What monument types and tie-out requirements apply to subdivision staking in Utah County?
Utah state statute and local subdivision ordinances specify monument types, minimum durability standards, and tie-out documentation for new subdivision corners. Generally, permanent monuments must be set at lot corners, block corners, and controlling points, with ties recorded on a monument record filed with the county surveyor. Verify current monument specifications with the Utah County Surveyor's office before finalizing your staking plan, as requirements are periodically updated.
Which office covers survey in Utah County, UT?
Field work in Utah County is dispatched through the Salt Lake City, UT regional hub, about 39 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Utah County projects.
Are the technicians you send to Utah County certified?
Field sampling and testing in Utah County are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Utah, coordinated under one proposal.
Scheduling & proposals
Need land surveying in Utah County?
Call to schedule a technician, or send project documents for a written proposal.