Home / Services / Survey / Sedgwick County, KS
Sedgwick County, Kansas
Land Surveying in Sedgwick County, KS
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Sedgwick County is covered on a project basis through our Kansas City, MO regional hub.
- Dispatched from
- Kansas City, MO regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Sedgwick County, KS — Wichita, Overland Park, Kansas City
- Coverage
- Kansas statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Kansas
- Call us
- (346) 420-5425
Scope
Survey services in Sedgwick County
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Sedgwick County
Sedgwick County sits at the center of one of the most active construction corridors on the southern Great Plains. Wichita's continued growth in industrial, logistics, aviation-support, and residential development means project sites move from entitlement to grading in compressed timelines, and errors introduced early in the survey phase compound into costly corrections in the field. Flat to gently rolling terrain across much of the county can create a false sense of simplicity—drainage patterns, utility corridors, and section-line road geometry still demand precise horizontal and vertical control before a shovel turns. Our survey crews, dispatched through our Kansas City regional hub, provide boundary delineation, topographic mapping, and construction staking that translates engineered plans into verified ground positions. Every deliverable is produced under a documented workflow designed to support downstream geotechnical, structural, and civil design decisions without rework.
Sedgwick County soils transition between silty clay loams and expansive clay-rich profiles in many developed areas, conditions where accurate finished-grade staking is especially important before subgrade preparation begins. Kansas weather windows—including late-spring wet periods and high summer heat that can accelerate concrete set—make timely pre-construction staking critical to keeping grading and foundation schedules on track.
FAQ · Sedgwick County
How does the flat terrain in Sedgwick County affect topographic survey accuracy requirements?
Low relief amplifies the impact of small vertical errors: a few hundredths of a foot in elevation can redirect drainage across a large flat site. Crews establish vertical control tied to a published datum and use sufficient shot density to capture subtle grade breaks. This level of detail is essential before civil engineers finalize storm drainage design or detention basin grading plans for Sedgwick County sites.
What datum and coordinate system should I request for a Sedgwick County project?
Most Sedgwick County municipal and county reviewers expect horizontal positions referenced to the Kansas State Plane Coordinate System, South Zone (NAD 83), and vertical elevations referenced to NAVD 88. Confirm the specific requirements with the City of Wichita Engineering Division or the county agency of jurisdiction before survey work begins, as individual municipalities within the county may have adopted local datum adjustments.
Can your crews coordinate survey control with a geotechnical boring layout on the same site visit?
Yes. When our geotechnical and survey scopes are ordered together for a Sedgwick County project, the team coordinates boring location staking as part of the site mobilization. This eliminates a separate mobilization cost and ensures boring collar elevations are captured at the time of drilling, which is required to produce accurate subsurface logs and cross-sections for foundation design.
Which office covers survey in Sedgwick County, KS?
Field work in Sedgwick County is dispatched through the Kansas City, MO regional hub, about 178 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Sedgwick County projects.
Are the technicians you send to Sedgwick County certified?
Field sampling and testing in Sedgwick County are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Kansas, coordinated under one proposal.
Scheduling & proposals
Need land surveying in Sedgwick County?
Call to schedule a technician, or send project documents for a written proposal.