Home / Services / Survey / Kings County, NY
Kings County, New York
Land Surveying in Kings County, NY
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Kings County is covered on a project basis through our New York, NY regional hub.
- Dispatched from
- New York, NY regional hub (5 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Kings County, NY — New York, Buffalo, Rochester
- Coverage
- New York statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in New York
- Call us
- (346) 420-5425
Scope
Survey services in Kings County
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Kings County
Kings County sits at the western tip of Long Island, where dense urban infill, brownfield redevelopment, and large mixed-use projects press up against some of the most closely scrutinized property lines in the country. Lot boundaries established decades ago by earlier borough surveys can diverge from current deed descriptions, and even minor discrepancies create title conflicts, zoning setback violations, or construction delays on projects where every foot of floor area carries significant value. Coordinating with the New York City Department of Buildings, navigating party-wall agreements, and fitting new foundations into tight urban blocks all demand survey work that is precise, well-documented, and legally defensible from the first stake. Dispatched through our New York, NY regional hub roughly five miles away, our field teams provide boundary delineation, topographic surveys, and construction staking sized to Kings County's project conditions — delivering reliable horizontal and vertical control so design intent translates accurately to the ground before earthwork or concrete placement begins.
Much of Kings County is underlain by fill, marine deposits, and variable glacial outwash soils that can affect benchmark stability and require surveyors to verify that established control points have not shifted between project phases. New York City's freeze-thaw cycles also make it advisable to recheck set stakes and batter boards after extended cold periods before structural layout work proceeds.
FAQ · Kings County
How does the New York City Department of Buildings process affect my survey and site plan submittal in Kings County?
DOB filings in Kings County require a survey prepared or reviewed by a New York State Licensed Land Surveyor and, depending on project type, may need to be referenced to the city's survey datum. Our field teams gather the control, boundary, and topographic data; coordinate with your licensed surveyor of record for the sealed document; and format deliverables to support your DOB site plan package and zoning compliance review.
Can you perform construction staking for a new building foundation on an infill lot in a dense Brooklyn neighborhood?
Yes. Urban infill staking in Kings County requires establishing offset lines and batter boards in confined spaces where direct hub placement is impractical. Our crews set reference offsets keyed to the structural grid, verify alignment against the boundary control established during the boundary survey, and coordinate with the general contractor's concrete or masonry schedule to minimize downtime between staking and layout work.
What control datum do you use for topographic surveys in Kings County, and will it match my engineer's design files?
We reference horizontal positions to NAD 83 and vertical elevations to NAVD 88 unless the contract documents specify a local city datum. Kings County projects submitted to the NYC DOB sometimes require NAVD 88-tied elevations correlated to city bench data. Before fieldwork begins, we confirm the required datum with the engineer of record so the delivered surface model integrates directly with design and drainage calculations.
Which office covers survey in Kings County, NY?
Field work in Kings County is dispatched through the New York, NY regional hub, about 5 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Kings County projects.
Are the technicians you send to Kings County certified?
Field sampling and testing in Kings County are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in New York, coordinated under one proposal.
Scheduling & proposals
Need land surveying in Kings County?
Call to schedule a technician, or send project documents for a written proposal.