Home / Services / Survey / Greensboro, NC
Greensboro, North Carolina
Land Surveying in Greensboro, NC
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Greensboro and the surrounding NC area is covered on a project basis through our Raleigh, NC regional hub.
- Dispatched from
- Raleigh, NC regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Greensboro and the surrounding NC area — Charlotte, Raleigh, Durham
- Coverage
- North Carolina statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in North Carolina
- Call us
- (346) 420-5425
Scope
Survey services in Greensboro
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Greensboro
Greensboro sits at the transition between the North Carolina Piedmont's rolling upland terrain and the upper coastal plain influence, where lot lines can shift with decades-old deed descriptions, easement overlays from utility expansion, and grade changes that affect drainage design and finished floor elevations alike. Development pressure in the Triad region—spanning commercial corridor redevelopment, industrial park expansion, and residential infill—means that positional errors found late in construction carry real cost. Accurate boundary, topographic, and construction staking surveys establish the legal and physical framework every downstream trade depends on. Our field crews, dispatched through our Raleigh regional hub approximately 67 miles from Greensboro, provide scheduled and project-based survey coverage across Guilford County and surrounding Triad jurisdictions. Deliverables follow current North Carolina surveying statutes and are signed and sealed by a licensed Professional Land Surveyor, giving your team a document set that holds up with the city, the county, and the title company.
Piedmont soils in the Guilford County area frequently include residual weathered rock and clay-rich profiles that can complicate grade interpretation during topographic work; field crews account for variable surface conditions when setting and checking control points. North Carolina's humid climate, with measurable precipitation distributed across most months, means scheduling survey fieldwork with adequate float time is advisable for projects where grade tolerances are tight.
FAQ · Greensboro
Does Greensboro or Guilford County have specific plat recordation requirements that affect how my survey is prepared?
Yes. Plats recorded in Guilford County must meet North Carolina General Statute Chapter 47-30 requirements, including minimum closure standards, monument descriptions, and the seal of a North Carolina-licensed Professional Land Surveyor. Our survey deliverables are prepared in compliance with those statutes. Confirm current local review fees and any supplemental county GIS submission requirements with the Guilford County Register of Deeds before submittal.
How does the Piedmont's variable topography affect the accuracy of construction staking for grading and utilities?
Rolling Piedmont terrain with elevation changes across a single parcel increases the importance of dense control networks and frequent check shots during staking. Offsets and cut/fill references must account for grade transitions that can accumulate error if control points are spaced too widely. Our crews establish project control tied to the State Plane coordinate system and verify staked positions against design files before leaving the site.
What horizontal and vertical datums do you use for survey work in the Greensboro area?
Field control is typically established using NAD 83 (North Carolina State Plane, FIPS 3200) for horizontal positions and NAVD 88 for vertical elevations, which aligns with the reference systems used by the City of Greensboro and Guilford County for engineering plan submittals. If a project requires a local assumed datum or a specific benchmark tie, that is coordinated with the design engineer before fieldwork begins.
Which office covers survey in Greensboro, NC?
Field work in Greensboro is dispatched through the Raleigh, NC regional hub, about 67 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Greensboro projects.
Are the technicians you send to Greensboro certified?
Field sampling and testing in Greensboro are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in North Carolina, coordinated under one proposal.
Hiring for project coverage. Field technician openings in Greensboro · all positions.
Scheduling & proposals
Need land surveying in Greensboro?
Call to schedule a technician, or send project documents for a written proposal.