Home / Services / Survey / Green Bay, WI
Green Bay, Wisconsin
Land Surveying in Green Bay, WI
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Green Bay and the surrounding WI area is covered on a project basis through our Chicago, IL regional hub.
- Dispatched from
- Chicago, IL regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Green Bay and the surrounding WI area — Milwaukee, Madison, Kenosha
- Coverage
- Wisconsin statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Wisconsin
- Call us
- (346) 420-5425
Scope
Survey services in Green Bay
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Green Bay
Green Bay sits at the convergence of the Fox River and the bay of Green Bay, where development spans industrial corridors, waterfront redevelopment zones, and suburban expansion pressing into agricultural land at the urban fringe. Each of these settings brings a different set of survey demands: irregular lot histories in older commercial districts, grade-sensitive infrastructure near drainage networks, and large-lot subdivisions where boundary ambiguity can stall permitting. Wisconsin's freeze-thaw cycle adds a practical layer — monuments move, benchmarks shift, and control established in one season must be verified before construction staking begins the next. Our firm provides boundary, topographic, and construction staking surveys dispatched through our Chicago regional hub, putting registered land surveyor-stamped deliverables on your project timeline. Whether you are grounding a civil design in a tight urban infill site or staking a pre-engineered building on a greenfield parcel north of the metro, our field crews work from your design files and return data your engineer of record can act on without rework.
Northeast Wisconsin's glacially deposited soils — ranging from sandy outwash to clay-rich till — can create subtle but consequential grade variability that topographic surveys must capture at sufficient density to support accurate drainage and grading design. Extended frost seasons mean control monuments and benchmarks should be confirmed at the start of each construction phase rather than assumed stable from a prior season's work.
FAQ · Green Bay
How does Wisconsin's frost depth affect the reliability of survey control between seasons?
Frost penetration in northeast Wisconsin can exceed 48 inches in a severe winter, which is sufficient to heave or displace set monuments and temporary benchmarks. Best practice is to verify primary horizontal and vertical control at the start of each new construction phase. Our crews re-observe control before initiating staking if significant freeze-thaw exposure has occurred since the original survey, reducing the risk of accumulated error in layout.
What datum and coordinate system should I specify for a Green Bay project to ensure compatibility with municipal GIS and utility records?
Most municipal and county spatial data in Wisconsin is referenced to the Wisconsin Coordinate Reference System (WisCRS), which uses NAD 83 as its horizontal datum and NAVD 88 as its vertical datum. Specifying WisCRS South Zone for horizontal control and NAVD 88 for elevations on your project documents helps ensure your survey deliverables align with Brown County and City of Green Bay infrastructure records and reduces conflicts during permitting and utility coordination.
Can you provide topographic survey data in a format compatible with Civil 3D or other design software used by my engineer?
Yes. Field data is collected using total station and GPS equipment and can be delivered as point clouds, LandXML, or DWG files structured with standard layer conventions. Confirm your engineer's software version and layer-naming requirements before survey mobilization and we will format the deliverable accordingly. Surface breaklines and spot elevations are coded in the field to support direct TIN model generation without manual re-entry.
Which office covers survey in Green Bay, WI?
Field work in Green Bay is dispatched through the Chicago, IL regional hub, about 183 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Green Bay projects.
Are the technicians you send to Green Bay certified?
Field sampling and testing in Green Bay are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Wisconsin, coordinated under one proposal.
Hiring for project coverage. Field technician openings in Green Bay · all positions.
Scheduling & proposals
Need land surveying in Green Bay?
Call to schedule a technician, or send project documents for a written proposal.