Home / Services / Survey / Bloomington, MN
Bloomington, Minnesota
Land Surveying in Bloomington, MN
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Bloomington and the surrounding MN area is covered on a project basis through our Minneapolis, MN regional hub.
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Bloomington and the surrounding MN area — Minneapolis, St. Paul, Rochester
- Coverage
- Minnesota statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Minnesota
- Call us
- (346) 420-5425
Scope
Survey services in Bloomington
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Bloomington
Bloomington sits on glacially deposited terrain that transitions from level floodplain along the Minnesota River to gently rolling upland soils farther north. That variability — combined with Minnesota's wide freeze-thaw cycle — means grade tolerances that look acceptable on paper can translate into costly field corrections if the original survey control is even slightly off. Tight horizontal and vertical control is not optional on projects ranging from Mall of America-area mixed-use redevelopment to the industrial and logistics facilities clustered along I-494. Our survey crews, dispatched through our Minneapolis regional hub approximately ten miles away, provide boundary delineation, topographic mapping, and construction staking sized to the scope of each project. Every assignment is coordinated so that design intent reaches the field accurately before earthwork or concrete placement begins, reducing costly rework downstream. The laboratory side of our operation runs under a documented quality system, and our field technicians carry ACI and NICET certifications relevant to the inspection work we pair with survey on many projects.
Minnesota's deep frost penetration — routinely reaching several feet in a typical winter — can shift temporary benchmarks and stakes if they are not set below the active frost zone or properly referenced before a freeze event; our crews account for seasonal timing when establishing and referencing control. Bloomington's mix of glacial till, outwash sands, and organics near the river corridor means existing legal descriptions and older plats occasionally conflict with conditions found in the field, making a thorough boundary review a practical first step on any redevelopment site.
FAQ · Bloomington
How does Minnesota's frost season affect the timing of construction staking on a Bloomington project?
Frost penetration in the Twin Cities area can reach three feet or more, which can heave stakes and temporary benchmarks set in unsaturated soils. Our crews tie all control to stable, referenced monuments and note seasonal conditions in the field record. For projects that span a winter shutdown, we recommend a control verification check at the start of the spring construction season before earthwork resumes.
What horizontal and vertical datum should we specify for a topographic survey in Bloomington?
Most Hennepin County and City of Bloomington submittals expect NAD 83 horizontal coordinates tied to the Minnesota State Plane South zone and NAVD 88 vertical datum. Confirm current requirements with the city engineer before survey begins, as datum preferences on utility and grading plans can affect how contours align with adjacent municipal infrastructure. We deliver data in the datum your design team specifies.
Can your crews coordinate with Hennepin County or the City of Bloomington for right-of-way and easement verification during a boundary survey?
Yes. Boundary work along Bloomington corridors routinely requires reviewing recorded plats, Hennepin County document archives, and MnDOT right-of-way maps where state routes are adjacent. Our surveyors research available recorded instruments and note gaps or conflicts in the boundary report. Any unresolved title questions are flagged for the project attorney or title company rather than assumed away in the field.
Which office covers survey in Bloomington, MN?
Field work in Bloomington is dispatched through the Minneapolis, MN regional hub, about 10 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Bloomington projects.
Are the technicians you send to Bloomington certified?
Field sampling and testing in Bloomington are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Minnesota, coordinated under one proposal.
Hiring: we staff this work locally. Field technician openings in Bloomington · all positions.
Scheduling & proposals
Need land surveying in Bloomington?
Call to schedule a technician, or send project documents for a written proposal.