Home / Services / Survey / Baltimore County, MD
Baltimore County, Maryland
Land Surveying in Baltimore County, MD
Boundary, topographic, and construction staking surveys that put the design on the ground accurately the first time. Baltimore County is covered on a project basis through our Washington, DC regional hub.
- Dispatched from
- Washington, DC regional hub (43 mi) · project-based staffing
- Lead time
- Scheduled by phone or proposal; lead time confirmed when the scope is set
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Baltimore County, MD — Baltimore, Columbia, Germantown
- Coverage
- Maryland statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in Maryland
- Call us
- (346) 420-5425
Scope
Survey services in Baltimore County
- Boundary and title surveys for acquisition and permitting
- Topographic surveys for civil design
- Construction staking: building corners, utilities, paving, and grades
- As-built surveys for closeout and conveyance
Full scope, standards list, and pricing basis: Land Surveying.
Local conditions
Survey conditions in Baltimore County
Baltimore County presents a layered construction environment: tight infill corridors in older suburban communities, greenfield development pushing into the Piedmont and Coastal Plain transition zone, and public infrastructure work governed by both county and state-level review. Property boundaries in areas with long platting histories—some dating to colonial-era land grants—can carry ambiguities that only a thorough boundary survey resolves before a shovel turns. Topographic surveys capture the real grades on sites where drainage toward the Chesapeake Bay watershed makes stormwater management a design priority, not an afterthought. Construction staking translates engineered plans into physical control on the ground, keeping crews aligned with permitted documents and reducing costly rework. Our survey crews serve Baltimore County through scheduled and project-based dispatch from our Washington, DC regional hub, roughly 43 miles away. We coordinate directly with contractors, project engineers, and owners to schedule fieldwork at the phases that keep your project moving.
Baltimore County sits at the geologic transition between the Piedmont uplands and the Atlantic Coastal Plain, so sites can shift from weathered crystalline rock to softer sedimentary soils across relatively short distances—a condition that affects benchmark stability and the placement of control points for construction staking. Seasonal freeze-thaw cycles and wet winters can also affect when ground conditions are suitable for reliable staking of fine grading and utility work.
FAQ · Baltimore County
Does Baltimore County require a recorded plat or boundary survey before I can pull a grading or building permit?
Baltimore County's Development Review process typically requires a site plan that accurately depicts lot lines, easements, and existing features. While the county does not universally mandate a new boundary survey for every permit, discrepancies between deed descriptions and physical conditions on older platted lots frequently surface during plan review. Having a current boundary survey in hand before submittal reduces back-and-forth with agency reviewers and avoids permit delays.
How does your firm handle sites near tidal wetlands or the 100-year floodplain boundary in Baltimore County?
Topographic surveys on sites near tidal or non-tidal wetlands must accurately establish existing ground elevations relative to NAVD 88 so that your engineer and environmental consultant can correctly delineate regulated areas and design compliant grading. We establish vertical control referenced to published benchmarks and deliver elevation data in the datum your permits require. Coordination with your wetlands consultant prior to fieldwork helps define the survey scope correctly.
What survey deliverables are typically expected by the State Highway Administration or Baltimore County Department of Public Works for road or utility projects?
Public right-of-way and utility projects in Maryland generally require topographic and boundary survey data in a format compatible with MdSHA or county DPW CAD standards, including horizontal control tied to Maryland State Plane coordinates (NAD 83) and vertical control tied to NAVD 88. Deliverables commonly include a sealed survey drawing, digital data files, and a control point summary. We discuss agency-specific format requirements during project scoping.
Which office covers survey in Baltimore County, MD?
Field work in Baltimore County is dispatched through the Washington, DC regional hub, about 43 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Baltimore County projects.
Are the technicians you send to Baltimore County certified?
Field sampling and testing in Baltimore County are performed by our ACI- and NICET-certified technicians. Survey engineering and professional services are delivered with professionals licensed in Maryland, coordinated under one proposal.
Scheduling & proposals
Need land surveying in Baltimore County?
Call to schedule a technician, or send project documents for a written proposal.