Home / Services / Geotechnical / Concord, NH
Concord, New Hampshire
Geotechnical Engineering in Concord, NH
Subsurface investigations, laboratory soils testing, and geotechnical reporting to characterize site conditions before design and verify them during construction. Concord and the surrounding NH area is covered on a project basis through our Boston, MA regional hub.
- Dispatched from
- Boston, MA regional hub · project-based mobilization
- Lead time
- Set in the proposal, with mobilization planned around your pour and earthwork schedule
- Laboratory
- Sugar Land, TX laboratory under chain of custody, or a mobile laboratory for large projects
- Reporting
- Reviewed and issued under a documented quality system; formatted for owner, engineer, and building-official review
- Serving
- Concord and the surrounding NH area — Manchester, Nashua, Derry
- Coverage
- New Hampshire statewide · 27 regional hubs
- Technicians
- ACI- and NICET-certified field staff; licensed professionals in New Hampshire
- Call us
- (346) 420-5425
Scope
Geotechnical services in Concord
- Soil borings and sampling programs sized to the structure and site
- Laboratory index testing: Atterberg limits (ASTM D4318), moisture content (ASTM D2216)
- Moisture-density relationships and bearing evaluation for foundations and pavements
- Expansive-soil characterization for slab and pavement design
- Construction-phase verification: proof rolls, subgrade acceptance, fill placement observation
ASTM D4318ASTM D2216ASTM D698ASTM D1557
Full scope, standards list, and pricing basis: Geotechnical Engineering.
Local conditions
Geotechnical conditions in Concord
New Hampshire's geology presents real challenges for anyone preparing to build in the Concord area. Glacially deposited soils — ranging from loose outwash sands and gravels to dense glacial till — can vary dramatically across a single parcel, and ledge rock can appear at shallow depths with little warning. Seasonal frost penetration, wet spring conditions, and freeze-thaw cycling add further complexity to foundation design decisions. Before a structural engineer can size footings or a contractor can bid earthwork, those subsurface conditions need to be characterized with field data, not assumptions. Our geotechnical team provides subsurface investigations — including soil borings, test pits, and in-situ testing — laboratory soils analysis, and stamped geotechnical reports that give designers and contractors the specific parameters they need. Coverage for Concord is dispatched through our Boston regional hub, with scheduling coordinated to fit your project timeline.
Glacially influenced soils common to central New Hampshire can include stratified drift, till, and isolated pockets of organic material, each with distinct bearing and drainage characteristics that affect foundation type selection. New Hampshire's frost depth requirements and the potential for rapid transitions from soft soil to ledge make pre-design subsurface investigation particularly important for accurate foundation and earthwork budgeting.
FAQ · Concord
What soil and subsurface conditions should I expect on a typical Concord-area site?
Central New Hampshire was shaped by glaciation, so sites commonly encounter glacial till, outwash sands and gravels, and occasionally shallow ledge or pockets of organic material. Bearing capacity and drainage characteristics vary considerably over short distances. A program of soil borings classified in accordance with ASTM D2487 and sampled by ASTM D1586 standard penetration testing provides the site-specific data needed to design reliably rather than defaulting to conservative assumptions.
How does New Hampshire's frost depth affect my foundation design, and will the geotechnical report address it?
New Hampshire building codes require foundations to bear below the design frost depth to prevent frost heave — generally in the range of four feet in the Concord area, though the local authority having jurisdiction (AHJ) governs the specific requirement. The geotechnical report addresses soil profile and moisture conditions that influence frost susceptibility and provides bearing recommendations consistent with IBC Section 1809 and local code requirements.
Can you perform borings in winter, and does frozen ground affect the investigation?
Drilling can continue through New Hampshire winters, but frozen ground affects access, casing requirements, and the ability to complete certain in-situ tests. Scheduling investigations during late spring through fall generally yields the most complete data set, particularly where groundwater elevation readings are needed. If a winter investigation is required, we coordinate drilling methods to accommodate frozen surface conditions and note any seasonal limitations in the report.
Which office covers geotechnical in Concord, NH?
Field work in Concord is dispatched through the Boston, MA regional hub, about 64 miles away. Laboratory testing is performed in Sugar Land, TX under chain of custody, or in a mobile laboratory mobilized to large Concord projects.
Are the technicians you send to Concord certified?
Field sampling and testing in Concord are performed by our ACI- and NICET-certified technicians. Geotechnical engineering and professional services are delivered with professionals licensed in New Hampshire, coordinated under one proposal.
Hiring for project coverage. Field technician openings in Concord · all positions.
Scheduling & proposals
Need geotechnical engineering in Concord?
Call to schedule a technician, or send project documents for a written proposal.