Home / Careers / Welding Inspector I (AWS CAWI) / Brookings, SD
Now hiring · Brookings, SD 57006 · $28–$36 / hour
Welding Inspector I (AWS CAWI) — Brookings, SD
A Welding Inspector I works under the direct supervision of a Certified Welding Inspector on structural steel and pipe welding: verifying fit-up and joint preparation, checking welder qualifications and WPS compliance, performing visual inspection to AWS D1.1 or the governing code, and keeping the weld map and inspection log. The seat is built for an AWS Certified Associate Welding Inspector, or an experienced welder or inspector on the CWI path, and the company sponsors the CWI exam.
This is a project-site position supporting programs in and around Brookings, South Dakota, staffed through the Minneapolis, MN regional hub on a project basis with travel as assigned.
In Brookings, expect Pierre Shale respect west, till and lake clays east, and certifications that travel with you, on us.
What you'll do
- Verify joint fit-up, preheat, and welding procedure specification (WPS) compliance before and during welding
- Perform visual weld inspection under CWI supervision to AWS D1.1, D1.5, or the governing code
- Confirm welder qualifications, consumable control, and equipment calibration records
- Maintain weld maps, inspection logs, and daily reports; flag rejectable indications for CWI disposition
- Coordinate nondestructive testing (UT, MT, PT) with the NDT technician and record the results
What we're looking for
- AWS Certified Associate Welding Inspector (CAWI), or 3+ years welding or welding inspection experience and eligibility to sit for the CWI exam
- Reads structural drawings, weld symbols, and WPS/PQR documents
- Physically able to work at height, in confined spaces, and on active steel erection sites
- Careful, consistent, and honest about what a weld looks like
What a week in this job looks like
Structural and pipe welding runs on the erector's schedule, so your week runs on it too: fit-up checks before the welders start, visual inspection as joints are completed, and the paperwork that ties each weld to a welder, a procedure, and a result. The CWI you work under makes the accept/reject calls on anything marginal; your job is to see everything and record it so nothing needs to be re-inspected because the record was thin.
You will see enough welds in a year to know what a good root looks like and what undercut, porosity, and incomplete fusion look like at a glance. That eye is the CWI exam.
Certifications, training, and where this leads
The company sponsors the AWS CWI exam and preparation once you meet the experience requirement, and the move to Welding Inspector II follows the certification. Bolting inspection (ICC) and NDT Level II qualifications are the natural additions.
Pay, schedule, and travel
Pay runs $28 to $36 an hour depending on certifications held, verified experience, and the program you are assigned to. Welding inspection follows the erector's and the fabricator's schedule: early starts, night shifts on some industrial work, and overtime when steel is going up.
Texas positions are dispatched from the Sugar Land headquarters; project-site positions elsewhere are staffed on a project basis with travel and per diem as assigned, and the listing for your city says which one it is.
Safety, quality, and the standards we work under
Welding inspection is performed to the code the project specifies and reported under our documented AASHTO R18 quality system; on IBC special inspection projects the reports go to the building official under Chapter 17. Accept/reject decisions are made to the code, not to the schedule.
The safety side is real: work at height, confined spaces, hot work, and active erection. Fall protection, confined-space, and site-specific training are provided and required.
How hiring works, and our commitment
Apply with your AWS certification number, the codes you inspect to, and your project list. Expect a direct conversation with the people you would work for, references that get called, and a written offer consistent with this posting. The role requires a valid driver's license and the ability to be present on active jobsites, with pre-employment screening consistent with jobsite and client requirements.
We are an equal opportunity employer and consider every applicant without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, disability, or veteran status.
Apply for this position — upload your resume and we fill in the form
The work behind this job in Brookings
Materials Testing in Brookings · Geotechnical in Brookings · Forensic in Brookings
Other levels of this role in Brookings
Certified Welding Inspector II (AWS CWI)Senior Certified Welding Inspector III (AWS SCWI)
Nearby openings
Welding Inspector I — Sioux Falls, SDWelding Inspector I — Rapid City, SDWelding Inspector I — Aberdeen, SDWelding Inspector I — Watertown, SD
FAQ
Working in Brookings — common questions
Is the Welding Inspector I (AWS CAWI) position in Brookings an office job or a field job?
Field and shop. Welding inspectors work on structural steel erection sites, in fabrication shops, and on pipe and vessel work, with report writing done on site.
Which hub covers Brookings?
The Minneapolis, MN regional hub, about 180 miles away. Work in Brookings is staffed on a project basis through that hub.
Do I need to relocate to Brookings?
Not necessarily. Project-site positions are staffed with travel and per diem as assigned; candidates already living near Brookings are preferred when a project starts there.
What certifications does a Welding Inspector I (AWS CAWI) in Brookings need?
AWS Certified Associate Welding Inspector (CAWI) to start, or documented welding experience that qualifies you to sit for the CWI; the company sponsors the AWS CWI exam and preparation once you meet the experience requirement.
What tests will I run on Brookings projects?
Fresh concrete testing at the truck — slump (ASTM C143), air content (ASTM C231), temperature (ASTM C1064), unit weight (ASTM C138), cylinder casting (ASTM C31) — and nuclear density on fill lifts (ASTM D6938) against the ASTM D698 or D1557 Proctor, plus aggregate and soil sampling for the laboratory.
What should I include in my application?
Years of experience, any certifications (ACI, NICET, ICC, nuclear gauge), and either a resume file or a short work history in the form. Applications without certifications are welcome for entry-level roles.