Home / Careers / Welding Inspector I (AWS CAWI)
Now hiring · $28–$36 / hour
Welding Inspector I (AWS CAWI)
A Welding Inspector I works under the direct supervision of a Certified Welding Inspector on structural steel and pipe welding: verifying fit-up and joint preparation, checking welder qualifications and WPS compliance, performing visual inspection to AWS D1.1 or the governing code, and keeping the weld map and inspection log. The seat is built for an AWS Certified Associate Welding Inspector, or an experienced welder or inspector on the CWI path, and the company sponsors the CWI exam.
What you'll do
- Verify joint fit-up, preheat, and welding procedure specification (WPS) compliance before and during welding
- Perform visual weld inspection under CWI supervision to AWS D1.1, D1.5, or the governing code
- Confirm welder qualifications, consumable control, and equipment calibration records
- Maintain weld maps, inspection logs, and daily reports; flag rejectable indications for CWI disposition
- Coordinate nondestructive testing (UT, MT, PT) with the NDT technician and record the results
What we're looking for
- AWS Certified Associate Welding Inspector (CAWI), or 3+ years welding or welding inspection experience and eligibility to sit for the CWI exam
- Reads structural drawings, weld symbols, and WPS/PQR documents
- Physically able to work at height, in confined spaces, and on active steel erection sites
- Careful, consistent, and honest about what a weld looks like
What a week in this job looks like
Structural and pipe welding runs on the erector's schedule, so your week runs on it too: fit-up checks before the welders start, visual inspection as joints are completed, and the paperwork that ties each weld to a welder, a procedure, and a result. The CWI you work under makes the accept/reject calls on anything marginal; your job is to see everything and record it so nothing needs to be re-inspected because the record was thin.
You will see enough welds in a year to know what a good root looks like and what undercut, porosity, and incomplete fusion look like at a glance. That eye is the CWI exam.
Certifications, training, and where this leads
The company sponsors the AWS CWI exam and preparation once you meet the experience requirement, and the move to Welding Inspector II follows the certification. Bolting inspection (ICC) and NDT Level II qualifications are the natural additions.
Pay, schedule, and travel
Pay runs $28 to $36 an hour depending on certifications held, verified experience, and the program you are assigned to. Welding inspection follows the erector's and the fabricator's schedule: early starts, night shifts on some industrial work, and overtime when steel is going up.
Texas positions are dispatched from the Sugar Land headquarters; project-site positions elsewhere are staffed on a project basis with travel and per diem as assigned, and the listing for your city says which one it is.
Safety, quality, and the standards we work under
Welding inspection is performed to the code the project specifies and reported under our documented AASHTO R18 quality system; on IBC special inspection projects the reports go to the building official under Chapter 17. Accept/reject decisions are made to the code, not to the schedule.
The safety side is real: work at height, confined spaces, hot work, and active erection. Fall protection, confined-space, and site-specific training are provided and required.
How hiring works, and our commitment
Apply with your AWS certification number, the codes you inspect to, and your project list. Expect a direct conversation with the people you would work for, references that get called, and a written offer consistent with this posting. The role requires a valid driver's license and the ability to be present on active jobsites, with pre-employment screening consistent with jobsite and client requirements.
We are an equal opportunity employer and consider every applicant without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, disability, or veteran status.
Apply for this position — upload your resume and we fill in the form
Any city — tell us where you are and we'll match you to the nearest work. Or pick your city below for the local posting.
Other levels of this role
Certified Welding Inspector II (AWS CWI) · $38–$52 / hourSenior Certified Welding Inspector III (AWS SCWI) · $50–$68 / hour
Openings by city
Connecticut
District of Columbia
Massachusetts
New Hampshire
New Jersey
North Dakota
Pennsylvania
South Dakota
Texas
HoustonSugar LandKatyThe WoodlandsPearlandPasadenaBaytownLeague CityConroeRichmondGalvestonBeaumontAustinSan AntonioDallasFort WorthAbileneEl PasoCorpus ChristiPlanoLubbockLaredoArlington
West Virginia
FAQ
Welding Inspector I (AWS CAWI) — questions applicants ask
What does a Welding Inspector I (AWS CAWI) earn?
The listed range is $28–$36 / hour, set by certifications held, years of documented field or laboratory experience, and the hub's market. Certified candidates enter above the bottom of the range.
What certifications matter most for a Welding Inspector I (AWS CAWI)?
AWS Certified Associate Welding Inspector (CAWI) to start, or documented welding experience that qualifies you to sit for the CWI; the company sponsors the AWS CWI exam and preparation once you meet the experience requirement.
Which standards does a Welding Inspector I (AWS CAWI) work to?
AWS D1.1 (structural steel) as the core, with AWS D1.5 (bridges), D1.8 (seismic), ASME Section IX, and API 1104 (pipelines) as projects require; AISC 360 and the IBC Chapter 17 structural steel special inspection tables; and the NDT methods that support them — ASTM E164 (UT), E709 (MT), and E165 (PT).
How do I apply?
Use the form on any city listing for this role: name, phone, email, years of experience, certifications, and a resume file or link. A hiring manager responds within a few business days. If you would rather talk first, call (346) 420-5425.
Where is this role based?
Wherever the project is. Choose the city page nearest you; Houston-area roles dispatch from Sugar Land, and roles in other metros are staffed through the regional hub that covers them.