Home / Careers / Plumbing Engineer / Atlanta, GA
Now hiring · Atlanta, GA 30303 · $95k–$130k / year
Plumbing Engineer — Atlanta, GA
The Plumbing Engineer supports construction-phase quality on the plumbing systems of active projects: reviewing submittals and shop drawings against the design documents, answering RFIs with the engineer of record, observing installation of domestic water, sanitary and storm drainage, medical gas, natural gas and fuel piping, backflow prevention, and fire-suppression supply, witnessing start-up and functional testing, and documenting what was installed against what was specified. You work alongside our plumbing inspectors and the project quality team, and you are the engineer the contractor calls when the drawing and the field disagree.
This is a project-site position supporting programs in and around Atlanta, Georgia, staffed through the Atlanta, GA regional hub on a project basis with travel as assigned.
A Atlanta route runs through red-clay subgrades, saprolite cuts, and metro concrete volume, and a record that follows you project to project.
What you'll do
- Review plumbing submittals, shop drawings, and product data against the contract documents and the International Plumbing Code (IPC) and Uniform Plumbing Code (UPC) as adopted, International Fuel Gas Code (IFGC), NFPA 99 for medical gas, ASSE backflow standards, and the plumbing sections of the project specifications
- Prepare RFI responses and field directives in coordination with the engineer of record
- Perform field observations of domestic water, sanitary and storm drainage, medical gas, natural gas and fuel piping, backflow prevention, and fire-suppression supply and write observation reports with photographs and specification references
- Witness start-up, functional performance tests, and test-and-balance or acceptance testing; review the test reports
- Support the commissioning agent and the quality team through punch list and closeout; maintain the deficiency log to closure
What we're looking for
- B.S. in mechanical engineering or equivalent; EIT required, PE preferred (or able to sit within 12 months)
- 3+ years of plumbing design or construction-phase engineering on commercial, industrial, healthcare, or institutional projects
- Working command of the International Plumbing Code (IPC) and Uniform Plumbing Code (UPC) as adopted, International Fuel Gas Code (IFGC), NFPA 99 for medical gas, ASSE backflow standards, and the plumbing sections of the project specifications
- Reads drawings and specifications fluently and writes a report an owner's representative can act on
What a week in this job looks like
Monday is the submittal log: what came in, what is due back to the contractor, which items need the engineer of record. Midweek is the field — walking the plumbing rough-in with the inspector, checking installations against the approved submittals, and photographing what will be covered up by Friday. The RFIs that come out of those walks get answered the same week, with the drawing reference and the code section, so the contractor is not waiting on you to pour or close a wall.
At start-up and commissioning you are on site for the functional tests, reading the test report against the sequence of operations, and signing off only on what you watched.
Pay, schedule, and travel
Pay runs $95,000 to $130,000 depending on certifications held, verified experience, and the program you are assigned to. The rhythm follows the construction schedule: heavier during rough-in and commissioning, lighter between phases.
Texas positions are dispatched from the Sugar Land headquarters; project-site positions elsewhere are staffed on a project basis with travel and per diem as assigned, and the listing for your city says which one it is.
Standards and quality
The work runs to the International Plumbing Code (IPC) and Uniform Plumbing Code (UPC) as adopted, International Fuel Gas Code (IFGC), NFPA 99 for medical gas, ASSE backflow standards, and the plumbing sections of the project specifications, documented under the company's quality system. Observation reports and test witness records carry your name and are retained as project quality records.
How hiring works, and our commitment
Apply with your license or EIT, your project list, and a sample observation report or submittal review (redacted as needed). Expect a direct conversation with the people you would work for, references that get called, and a written offer consistent with this posting. The role requires a valid driver's license and the ability to be present on active jobsites, with pre-employment screening consistent with jobsite and client requirements.
We are an equal opportunity employer and consider every applicant without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, disability, or veteran status.
Apply for this position — upload your resume and we fill in the form
The work behind this job in Atlanta
Materials Testing in Atlanta · Geotechnical in Atlanta · Forensic in Atlanta
Nearby openings
Plumbing Engineer — Birmingham, ALPlumbing Engineer — Nashville, TNPlumbing Engineer — Charlotte, NC
FAQ
Working in Atlanta — common questions
Is the Plumbing Engineer position in Atlanta an office job or a field job?
Office and field. Plumbing Engineers split time between document review at a desk and field observation on active jobsites; expect several site visits a week on an active project.
Which hub covers Atlanta?
The Atlanta, GA regional hub, about 0 miles away. Work in Atlanta is staffed on a project basis through that hub.
Do I need to relocate to Atlanta?
Not necessarily. Project-site positions are staffed with travel and per diem as assigned; candidates already living near Atlanta are preferred when a project starts there.
What certifications does a Plumbing Engineer in Atlanta need?
EIT is required and a PE license is preferred; the company pays exam fees and review courses for the PE. ICC Commercial Plumbing Inspector (P2) or state plumbing inspector license; ASSE 6020 medical gas inspector and ASSE 5110 backflow tester are a plus.
What tests will I run on Atlanta projects?
Fresh concrete testing at the truck — slump (ASTM C143), air content (ASTM C231), temperature (ASTM C1064), unit weight (ASTM C138), cylinder casting (ASTM C31) — and nuclear density on fill lifts (ASTM D6938) against the ASTM D698 or D1557 Proctor, plus aggregate and soil sampling for the laboratory.
What should I include in my application?
Years of experience, any certifications (ACI, NICET, ICC, nuclear gauge), and either a resume file or a short work history in the form. Applications without certifications are welcome for entry-level roles.