Home / Careers / Mechanical Inspector / West Valley City, UT
Now hiring · West Valley City, UT 84119 · $32–$48 / hour
Mechanical Inspector — West Valley City, UT
The Mechanical Inspector performs third-party and owner's-representative inspections of mechanical work on active construction projects: rough-in, cover-up, and final inspections of HVAC, hydronic, refrigeration, ventilation, and building-automation systems; witnessing pressure tests, insulation-resistance tests, and acceptance tests; and writing the daily inspection report that goes to the owner, the engineer, and the contractor. You are the independent set of eyes on the mechanical trades, and your report is the record.
This is a project-site position supporting programs in and around West Valley City, Utah, staffed through the Salt Lake City, UT regional hub on a project basis with travel as assigned.
A West Valley City route runs through Bonneville lakebed clays, bench collapsibles, and Wasatch Front growth concrete, and certifications that travel with you, on us.
What you'll do
- Perform rough-in, in-progress, and final inspections of HVAC, hydronic, refrigeration, ventilation, and building-automation systems against approved drawings, submittals, and the International Mechanical Code (IMC)
- Witness and document pressure, leak, insulation-resistance, continuity, and acceptance tests; verify test equipment calibration
- Write daily inspection reports with photographs, locations, and specification/code references; log deficiencies and track them to correction
- Verify installer qualifications and material certifications against the submittals and the specifications
- Coordinate inspection scheduling with the superintendent and the authority having jurisdiction; attend quality meetings
What we're looking for
- ICC Commercial Mechanical Inspector (M2) or Mechanical Plans Examiner, plus EPA 608 for refrigerant work; NEBB or AABC test-and-balance credentials are a plus
- 5+ years in the mechanical trade, mechanical inspection, or mechanical construction QC on commercial or industrial projects
- Reads drawings, specifications, and code tables without help; comfortable telling a foreman an installation does not pass
- Clean, timely written reports — daily, not Friday
What a week in this job looks like
You arrive before the trades do and walk what was installed yesterday against the drawings. Through the day you inspect rough-in before it is covered, witness the tests the specification requires, and photograph everything. The report is written and sent before you leave; the deficiency log is updated the same day.
When something does not pass, you document it, tell the superintendent plainly, and re-inspect when it is corrected. The record shows both.
Pay, schedule, and travel
Pay runs $32 to $48 an hour depending on certifications held, verified experience, and the program you are assigned to. Hours follow the construction schedule, including early starts and the occasional night shutdown; overtime is paid at time and a half.
Texas positions are dispatched from the Sugar Land headquarters; project-site positions elsewhere are staffed on a project basis with travel and per diem as assigned, and the listing for your city says which one it is.
Safety, quality, and the standards we work under
Inspections run to the International Mechanical Code (IMC), ASHRAE 62.1/90.1/15, SMACNA duct construction standards, NFPA 90A/90B, and the mechanical sections of the project specifications, under the company's documented quality system. Site-specific safety training and the client's orientation are completed before the first inspection.
How hiring works, and our commitment
Apply with your certifications, your trade and inspection history, and a recent inspection report you wrote (redacted as needed). Expect a direct conversation with the people you would work for, references that get called, and a written offer consistent with this posting. The role requires a valid driver's license and the ability to be present on active jobsites, with pre-employment screening consistent with jobsite and client requirements.
We are an equal opportunity employer and consider every applicant without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, disability, or veteran status.
Apply for this position — upload your resume and we fill in the form
The work behind this job in West Valley City
Materials Testing in West Valley City · Geotechnical in West Valley City · Forensic in West Valley City
Nearby openings
Mechanical Inspector — Salt Lake City, UTMechanical Inspector — Provo, UTMechanical Inspector — West Jordan, UTMechanical Inspector — Orem, UT
FAQ
Working in West Valley City — common questions
Is the Mechanical Inspector position in West Valley City an office job or a field job?
Field. Mechanical Inspectors are on the jobsite for most of the day, with report-writing at the end of the shift; some projects require night or weekend inspections around shutdowns and tie-ins.
Which hub covers West Valley City?
The Salt Lake City, UT regional hub, about 8 miles away. Work in West Valley City is staffed on a project basis through that hub.
Do I need to relocate to West Valley City?
Not necessarily. Project-site positions are staffed with travel and per diem as assigned; candidates already living near West Valley City are preferred when a project starts there.
What certifications does a Mechanical Inspector in West Valley City need?
ICC Commercial Mechanical Inspector (M2) or Mechanical Plans Examiner, plus EPA 608 for refrigerant work; NEBB or AABC test-and-balance credentials are a plus. The company pays for ICC exams and renewals and for the additional certifications a project requires.
What tests will I run on West Valley City projects?
Fresh concrete testing at the truck — slump (ASTM C143), air content (ASTM C231), temperature (ASTM C1064), unit weight (ASTM C138), cylinder casting (ASTM C31) — and nuclear density on fill lifts (ASTM D6938) against the ASTM D698 or D1557 Proctor, plus aggregate and soil sampling for the laboratory.
What should I include in my application?
Years of experience, any certifications (ACI, NICET, ICC, nuclear gauge), and either a resume file or a short work history in the form. Applications without certifications are welcome for entry-level roles.